The Intel GSW150 Ethernet Switch (aka. Lantiq PEB7084) is the predecessor of
MaxLinear's GSW1xx series of switches. It shares most features, but has a
slightly different port layout and different MII interfaces.
Adding support for this switch to the mxl-gsw1xx driver is quite trivial.
---
Changes since initial submission:
 * add patch fixing node naming convention for dt-bindings
 * introduce GSWIP_MAX_PORTS macro
 * don't assert SGMII PCS reset in case chip doesn't have SGMII
 * use case ranges in phylink_get_caps

Daniel Golle (6):
  dt-bindings: net: dsa: lantiq,gswip: use correct node name
  dt-bindings: net: dsa: lantiq,gswip: add Intel GSW150
  net: dsa: lantiq: allow arbitrary MII registers
  net: dsa: lantiq: clean up phylink_get_caps switch statement
  net: dsa: mxl-gsw1xx: only setup SerDes PCS if it exists
  net: dsa: mxl-gsw1xx: add support for Intel GSW150

 .../bindings/net/dsa/lantiq,gswip.yaml        |   6 +-
 drivers/net/dsa/lantiq/lantiq_gswip.c         |  42 ++++--
 drivers/net/dsa/lantiq/lantiq_gswip.h         |   6 +-
 drivers/net/dsa/lantiq/lantiq_gswip_common.c  |  27 +---
 drivers/net/dsa/lantiq/mxl-gsw1xx.c           | 139 ++++++++++++++----
 drivers/net/dsa/lantiq/mxl-gsw1xx.h           |   2 +
 6 files changed, 149 insertions(+), 73 deletions(-)

-- 
2.52.0