From: Cong Dang <cong.dang.xn@renesas.com>
According to the datasheet, HS bit should be specified to 1 when using
DMA transfer. As DMA transfer is not supported, it should be cleared to
0.
Previously, the driver relied on the HS bit being cleared by prior
firmware but this is not always the case.
Fix this by ensuring the bit is cleared during hardware initialization.
Fixes: ca7d8b980b67f133 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/memory/renesas-rpc-if.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 4316988d791a527f..61c288d403750b14 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -317,6 +317,9 @@ int rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
regmap_update_bits(rpc->regmap, RPCIF_PHYCNT, RPCIF_PHYCNT_PHYMEM_MASK,
RPCIF_PHYCNT_PHYMEM(hyperflash ? 3 : 0));
+ /* DMA Transfer is not supported */
+ regmap_update_bits(rpc->regmap, RPCIF_PHYCNT, RPCIF_PHYCNT_HS, 0);
+
if (rpc->type == RPCIF_RCAR_GEN3)
regmap_update_bits(rpc->regmap, RPCIF_PHYCNT,
RPCIF_PHYCNT_STRTIM(7), RPCIF_PHYCNT_STRTIM(7));
--
2.25.1