From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Hi,

Series adds CAN support for the Renesas RZ/G3S SoC. Along with it a typo
fix patch was added on the CAN driver.

Merge strategy:
- patches 1-5/7 should go though the CAN tree
- patches 6-7/7 should go though Renesas tree

Thank you,
Claudiu

Changes in v4:
- dropped patch "clk: r9a08g045-cpg: Add clocks and resets for CAN-FD"
  since it was applied
- collected tags
- s/mode_select_na/fixed_canfd in patch 4/7
- used TCAN1046 compatible in patch 7/7 and adjusted the standby-gpios
  property

Changes in v3:
- addressed sashiko review comments

Changes in v2:
- collected tags
- addressed sashiko review comments

Claudiu Beznea (7):
  dt-bindings: can: renesas,rcar-canfd: Document RZ/G3S SoC
  can: rcar_canfd: Fix typos in macro names
  can: rcar_canfd: Allow the CAN FD clock to be sourced from fck
  can: rcar_canfd: Do not set registers selecting the CAN mode
  can: rcar_canfd: Add support for Renesas RZ/G3S
  arm64: dts: renesas: r9a08g045: Add CAN-FD node
  arm64: dts: renesas: rzg3s-smarc: Enable CAN-FD

 .../bindings/net/can/renesas,rcar-canfd.yaml  | 20 +++++-
 arch/arm64/boot/dts/renesas/r9a08g045.dtsi    | 39 +++++++++++
 .../boot/dts/renesas/rzg3s-smarc-switches.h   | 12 ++++
 arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi  | 45 +++++++++++++
 drivers/net/can/rcar/rcar_canfd.c             | 65 +++++++++++++++----
 5 files changed, 168 insertions(+), 13 deletions(-)

-- 
2.43.0