drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c | 1 + 1 file changed, 1 insertion(+)
quickspi_probe() calls pm_runtime_use_autosuspend(), but
quickspi_remove() does not call the matching
pm_runtime_dont_use_autosuspend() during teardown.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the driver
remove path.
This issue was found by manual code inspection.
Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
---
drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c b/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c
index 4ae2e1718b30..3c87519aca84 100644
--- a/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c
+++ b/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c
@@ -713,6 +713,7 @@ static void quickspi_remove(struct pci_dev *pdev)
quickspi_hid_remove(qsdev);
quickspi_dma_deinit(qsdev);
+ pm_runtime_dont_use_autosuspend(qsdev->dev);
pm_runtime_get_noresume(qsdev->dev);
quickspi_dev_deinit(qsdev);
--
2.43.0
On 08/08/2026 17:17, Guangshuo Li wrote:
> quickspi_probe() calls pm_runtime_use_autosuspend(), but
> quickspi_remove() does not call the matching
> pm_runtime_dont_use_autosuspend() during teardown.
>
> If the autosuspend delay is set to a negative value while autosuspend
> is enabled, the runtime PM core increments usage_count to prevent
> runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
> during teardown, this reference is not dropped.
>
> The documentation for pm_runtime_use_autosuspend() also notes that it
> is important to undo it with pm_runtime_dont_use_autosuspend() at
> driver exit time, unless runtime PM was initially enabled with
> devm_pm_runtime_enable().
>
> Add the missing pm_runtime_dont_use_autosuspend() call to the driver
> remove path.
>
> This issue was found by manual code inspection.
>
> Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
> Cc: stable@vger.kernel.org
> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
> ---
You sent vast amount of patches, all separate, making it very difficult
to track and respond in efficient way. Do not do that.
Group your work per subsystem.
You were asked to clarify and respond to incorrect fixes statement. I do
not see how you clarified and responded at all.
Best regards,
Krzysztof
Hi Krzysztof,
On Thu, 20 Aug 2026 at 22:50, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On 08/08/2026 17:17, Guangshuo Li wrote:
> > quickspi_probe() calls pm_runtime_use_autosuspend(), but
> > quickspi_remove() does not call the matching
> > pm_runtime_dont_use_autosuspend() during teardown.
> >
> > If the autosuspend delay is set to a negative value while autosuspend
> > is enabled, the runtime PM core increments usage_count to prevent
> > runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
> > during teardown, this reference is not dropped.
> >
> > The documentation for pm_runtime_use_autosuspend() also notes that it
> > is important to undo it with pm_runtime_dont_use_autosuspend() at
> > driver exit time, unless runtime PM was initially enabled with
> > devm_pm_runtime_enable().
> >
> > Add the missing pm_runtime_dont_use_autosuspend() call to the driver
> > remove path.
> >
> > This issue was found by manual code inspection.
> >
> > Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
> > ---
>
> You sent vast amount of patches, all separate, making it very difficult
> to track and respond in efficient way. Do not do that.
>
> Group your work per subsystem.
>
> You were asked to clarify and respond to incorrect fixes statement. I do
> not see how you clarified and responded at all.
>
> Best regards,
> Krzysztof
Sorry about that. I should have replied to the earlier review comments
explicitly, and I also should not have sent so many separate patches.
I will group future patches by subsystem and make sure to respond
clearly to review feedback before resending.
Thanks for pointing this out.
Best regards,
Guangshuo
> -----Original Message-----
> From: Guangshuo Li <lgs201920130244@gmail.com>
> Sent: Saturday, August 8, 2026 11:18 PM
> To: Xu, Even <even.xu@intel.com>; Sun, Xinpeng <xinpeng.sun@intel.com>; Jiri
> Kosina <jikos@kernel.org>; Benjamin Tissoires <bentiss@kernel.org>; Sakari Ailus
> <sakari.ailus@linux.intel.com>; Danny D. <d3z.the.dev@gmail.com>; Guangshuo
> Li <lgs201920130244@gmail.com>; Abhishek Tamboli
> <abhishektamboli9@gmail.com>; Mark Pearson <mpearson-lenovo@squebb.ca>;
> Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>; linux-
> input@vger.kernel.org; linux-kernel@vger.kernel.org
> Cc: stable@vger.kernel.org
> Subject: [PATCH] HID: intel-thc-hid: intel-quickspi: fix autosuspend cleanup during
> teardown
>
> quickspi_probe() calls pm_runtime_use_autosuspend(), but
> quickspi_remove() does not call the matching
> pm_runtime_dont_use_autosuspend() during teardown.
>
> If the autosuspend delay is set to a negative value while autosuspend is enabled,
> the runtime PM core increments usage_count to prevent runtime suspend.
> Without calling pm_runtime_dont_use_autosuspend() during teardown, this
> reference is not dropped.
>
> The documentation for pm_runtime_use_autosuspend() also notes that it is
> important to undo it with pm_runtime_dont_use_autosuspend() at driver exit
> time, unless runtime PM was initially enabled with devm_pm_runtime_enable().
>
> Add the missing pm_runtime_dont_use_autosuspend() call to the driver remove
> path.
>
> This issue was found by manual code inspection.
>
> Fixes: 6912aaf3fd24 ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
> Cc: stable@vger.kernel.org
> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
> ---
> drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c
> b/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c
> index 4ae2e1718b30..3c87519aca84 100644
> --- a/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c
> +++ b/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c
> @@ -713,6 +713,7 @@ static void quickspi_remove(struct pci_dev *pdev)
> quickspi_hid_remove(qsdev);
> quickspi_dma_deinit(qsdev);
>
> + pm_runtime_dont_use_autosuspend(qsdev->dev);
Reviewed-by: Even Xu <even.xu@intel.com>
> pm_runtime_get_noresume(qsdev->dev);
>
> quickspi_dev_deinit(qsdev);
> --
> 2.43.0
© 2016 - 2026 Red Hat, Inc.