Replace the open-coded platform_get_resource() plus devm_ioremap()
sequence with devm_platform_ioremap_resource(), which fetches the
resource, requests the region and maps it in one call. Switch the error
check to IS_ERR()/PTR_ERR() and drop the now-unused struct resource
pointer.

There is a single IORESOURCE_MEM resource, and the SATA PHY registers
are mapped separately via of_iomap() from distinct DT nodes, so the
region reservation added by devm_ioremap_resource() is exclusive and
does not introduce overlap failures.

The mem-based ata_port_desc() line is dropped along with the resource
pointer; the remaining per-port description is retained.

Built for ARM (drivers/ata/sata_highbank.o) with LLVM=1.

Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/ata/sata_highbank.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 3421039f4bae..a0b6e197cfb5 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -455,7 +455,7 @@ static int ahci_highbank_probe(struct platform_device *pdev)
 	struct ahci_host_priv *hpriv;
 	struct ecx_plat_data *pdata;
 	struct ata_host *host;
-	struct resource *mem;
+	void __iomem *mmio;
 	int irq;
 	int i;
 	int rc;
@@ -463,11 +463,9 @@ static int ahci_highbank_probe(struct platform_device *pdev)
 	struct ata_port_info pi = ahci_highbank_port_info;
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(dev, "no mmio space\n");
-		return -EINVAL;
-	}
+	mmio = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mmio))
+		return PTR_ERR(mmio);
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -488,12 +486,7 @@ static int ahci_highbank_probe(struct platform_device *pdev)
 
 	hpriv->irq = irq;
 	hpriv->flags |= (unsigned long)pi.private_data;
-
-	hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
-	if (!hpriv->mmio) {
-		dev_err(dev, "can't map %pR\n", mem);
-		return -ENOMEM;
-	}
+	hpriv->mmio = mmio;
 
 	rc = highbank_initialize_phys(dev, hpriv->mmio);
 	if (rc)
@@ -537,7 +530,6 @@ static int ahci_highbank_probe(struct platform_device *pdev)
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
-		ata_port_desc(ap, "mmio %pR", mem);
 		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
 
 		/* set enclosure management message type */
-- 
2.55.0

On 7/15/26 10:14, Rosen Penev wrote:
> Replace the open-coded platform_get_resource() plus devm_ioremap()
> sequence with devm_platform_ioremap_resource(), which fetches the
> resource, requests the region and maps it in one call. Switch the error
> check to IS_ERR()/PTR_ERR() and drop the now-unused struct resource
> pointer.
> 
> There is a single IORESOURCE_MEM resource, and the SATA PHY registers
> are mapped separately via of_iomap() from distinct DT nodes, so the
> region reservation added by devm_ioremap_resource() is exclusive and
> does not introduce overlap failures.
> 
> The mem-based ata_port_desc() line is dropped along with the resource
> pointer; the remaining per-port description is retained.
> 
> Built for ARM (drivers/ata/sata_highbank.o) with LLVM=1.
> 
> Assisted-by: opencode:hy3-free
> Signed-off-by: Rosen Penev <rosenp@gmail.com>

Applied to for-7.3. Thanks!

-- 
Damien Le Moal
Western Digital Research