This series adds pinctrl support for the Rockchip RV1106 and its
RV1103 package variant, split out from the initial RV1106 enablement
series [1] following feedback to submit per subsystem.

On this SoC each GPIO bank has a dedicated IO control (IOC) register
block, unlike earlier Rockchip designs where the registers of all
banks share a GRF region. Following Jonas's review of v1, each bank
node now references the syscon for its own IOC block through a
rockchip,grf phandle and the driver uses a separate regmap per bank,
so no regmap crosses a block boundary.

This v2 is tested on a Luckfox Pico Mini B (RV1103): pinctrl and the
four GPIO banks probe, and the sdmmc pinctrl state is applied through
the per-bank IOC regmaps, with the SD card working.

The corresponding devicetree changes are part of the main RV1106
series, which goes through the Rockchip tree.

[1] https://patchwork.kernel.org/project/linux-rockchip/list/?series=1122658

Changes in v2:
- Add new patch for the per-bank IOC reference
- Use a separate IOC regmap per bank, taken from the rockchip,grf
  phandle of each bank node and identified by the gpio alias, with
  block-relative register offsets
- Reject drive-strength requests for GPIO0 pins above 6, which have no
  drive-strength registers
- Specify only the first iomux offset for each bank, letting the driver
  calculate the increments

Simon Glass (3):
  dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Add RV1106 pinctrl support

 .../bindings/gpio/rockchip,gpio-bank.yaml     |   7 +
 .../bindings/pinctrl/rockchip,pinctrl.yaml    |   1 +
 drivers/pinctrl/pinctrl-rockchip.c            | 168 ++++++++++++++++++
 drivers/pinctrl/pinctrl-rockchip.h            |   4 +
 4 files changed, 180 insertions(+)

---
base-commit: 3b029c035b34bbc693405ddf759f0e9b920c27f1
branch: rv1106b2

-- 
2.43.0