GPIO interrupts that are wakeup capable need to be forwarded to wakeup
capable parent irqchip. This is done via writing to it's wakeup_enable bit.

Currently the bit is set only for PDC irqchip by checking skip_wake_irqs.
skip_wake_irqs is set to differentiate between parent irqchips MPM and
PDC. It is set when the parent irqchip is PDC to inform pinctrl about
skipping the IRQ setting up at TLMM.

However, the functionality to forward GPIO interrupts during SoC low
power mode is needed regardless of which parent irqchip it is.
Without the functionality it is impossible for MPM irqchip to detect the
GPIO interrupt during SoC low power mode since for MPM irqchip the
skip_wake_irqs is always false.

Remove skip_wake_irqs condition when setting wakeup enable bit to allow
forwarding GPIO interrupts for SoCs using MPM irqchip too.

Fixes: 76b446f5b86e ("pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
---
Changes in v3:
- Added explanation about skip_wake_irqs in commit message.
- Link to v2: https://lore.kernel.org/r/20260430-enable_wakeup_capable_gpios-v2-1-8c26ac795318@oss.qualcomm.com

Changes in v2:
- Modified comment to specify MPM HW as well.
- Spelling correction.
- Link to v1: https://lore.kernel.org/r/20260430-enable_wakeup_capable_gpios-v1-1-5de39bf06094@oss.qualcomm.com
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 45b3a2763eb85405fecdd4770ba3d4ab684563f0..6a24f9b5e4a979528ba6b5b87fd297c2783ec765 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -1242,12 +1242,12 @@ static int msm_gpio_irq_reqres(struct irq_data *d)
 	/*
 	 * If the wakeup_enable bit is present and marked as available for the
 	 * requested GPIO, it should be enabled when the GPIO is marked as
-	 * wake irq in order to allow the interrupt event to be transfered to
-	 * the PDC HW.
+	 * wake irq in order to allow the interrupt event to be transferred to
+	 * the PDC/MPM HW.
 	 * While the name implies only the wakeup event, it's also required for
 	 * the interrupt event.
 	 */
-	if (test_bit(d->hwirq, pctrl->skip_wake_irqs) && g->intr_wakeup_present_bit) {
+	if (g->intr_wakeup_present_bit) {
 		u32 intr_cfg;
 
 		raw_spin_lock_irqsave(&pctrl->lock, flags);
@@ -1275,7 +1275,7 @@ static void msm_gpio_irq_relres(struct irq_data *d)
 	unsigned long flags;
 
 	/* Disable the wakeup_enable bit if it has been set in msm_gpio_irq_reqres() */
-	if (test_bit(d->hwirq, pctrl->skip_wake_irqs) && g->intr_wakeup_present_bit) {
+	if (g->intr_wakeup_present_bit) {
 		u32 intr_cfg;
 
 		raw_spin_lock_irqsave(&pctrl->lock, flags);

---
base-commit: b4e07588e743c989499ca24d49e752c074924a9a
change-id: 20260430-enable_wakeup_capable_gpios-cb9439ae8772

Best regards,
-- 
Sneh Mankad <sneh.mankad@oss.qualcomm.com>