This patch series adds support for Analog Devices AD5529R, a 16 channel
16 and 12 bit voltage Digital-to-Analog Converter (DAC) with integrated
precision reference. The AD5529R operates from both unipolar and
bipolar supplies. The device communicates via SPI interface.

**Device Overview:**
The AD5529R features 16 independent DAC channels, with 16 or 12 bit
resolution, allowing independently programmable output ranges. The
internal 4.096V precision reference sets the accuracy of the output
voltage.

**Features Implemented:**
- Automatic detection of 12/16 bit variant with product ID read.
- Reset support via GPIO.
- Dual regmap configuration to handle 8 and 16 bit registers.

**Patch Summary:**
1. **dt-bindings**: Binding documentation with channel configuration.
2. **driver**: Implement IIO DAC Driver with regmap support.

**Testing:**
The driver was compiled and tested on the EVAL-AD5529R-ARDZ using a
coraZ7 with a mainline v7.0 kernel.

**Driver Rationale:**
AD5529R introduces:
1. A unique register layout
2. Mixed 8-bit and 16-bit register accesses
3. Product ID based generic identification
4. Hardware specific features like function generators, multi-die
hotpath registers etc.

The device warrants its own drivers due to these fundamental
architectural differences, that would require substantial changes to
existing drivers without providing reusable benefits. The standalone
driver also allows future extensions for related devices in the same
family.

Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
Changes in v3:
- Split into adi,ad5529r-16 and adi,ad5529r-12 device tree compatibles
- Add DT-based output range configuration via adi,output-range-microvolt
- Expand DT binding: vref-supply, clear/tg GPIOs, interrupts, muxout
- Correct power supply voltage specifications as per datasheet
- Reduce SPI frequency limit to 25MHz as per datasheet specs
- Switch to autoincrement addressing mode, remove +1 register offsets
- Use DT match data instead of device ID detection for fallback support
- Implement dynamic scale/offset calculation per configured channel range
- Added explicit val_format_endian and reg_stride for 16-bit regmap bus
- Code cleanup: alphabetical includes, ARRAY_SIZE(), unused defines
- Minor: .sign→.format field, simplify read/write order, optional hvss-supply
- Remove redundant driver documentation ad5529r.rst
- Link to v2: https://lore.kernel.org/r/20260508-ad5529r-driver-v2-0-e315441685d7@analog.com

Changes in v2:
- Fix IIO scale to use millivolts per ABI requirement
- Fix documentation voltage calculations (2.5V not 2.048V)
- Fix bipolar ranges in documentation (±5V, ±10V, ±15V, ±20V)
- Fix alphabetical ordering in documentation index
- Add missing newline to documentation file
- Fix scale units description (millivolts not microvolts)
- Include a section for driver rationale in the cover letter
- Reword contents in cover letter 12/16 bit generic->variant
- Add dependency array for spi-cpha and spi-cpol properties
- Link to v1: https://lore.kernel.org/r/20260507-ad5529r-driver-v1-0-b4460f3cb44f@analog.com

---
Janani Sunil (2):
      dt-bindings: iio: dac: Add AD5529R
      iio: dac: Add AD5529R DAC driver support

 .../devicetree/bindings/iio/dac/adi,ad5529r.yaml   | 217 +++++++++
 MAINTAINERS                                        |   8 +
 drivers/iio/dac/Kconfig                            |  17 +
 drivers/iio/dac/Makefile                           |   1 +
 drivers/iio/dac/ad5529r.c                          | 527 +++++++++++++++++++++
 5 files changed, 770 insertions(+)
---
base-commit: 93df88612859e8e19dec93c69d563b4b73e9bd4b
change-id: 20260507-ad5529r-driver-866bbdd864de

Best regards,
-- 
Janani Sunil <janani.sunil@analog.com>