[PATCH v5 0/3] Enable mdss1 Display Port for Qualcomm lemans-ride platform

Mani Chandana Ballary Kuntumalla posted 3 patches 15 hours ago
.../dts/qcom/lemans-evk-ifp-mezzanine.dtso    |  74 +++++
.../boot/dts/qcom/lemans-ride-common.dtsi     |  80 +++++
arch/arm64/boot/dts/qcom/lemans.dtsi          | 289 ++++++++++++++++--
3 files changed, 416 insertions(+), 27 deletions(-)
[PATCH v5 0/3] Enable mdss1 Display Port for Qualcomm lemans-ride platform
Posted by Mani Chandana Ballary Kuntumalla 15 hours ago
This series adds the DPTX0 and DPTX1 nodes, as a part of mdss1
on Qualcomm lemans SoC. It also enables Display Port on Qualcomm
lemans-ride and lemans-evk-ifp-mezzanine platforms.

---
This series is dependent on below series:
https://lore.kernel.org/all/20260128114853.2543416-1-quic_riteshk@quicinc.com/

Change in v5:
- Moved OPP tables inside the mdss0 and mdss0_dp0 nodes and reused them for other nodes. [Konrad]
- Added newline before subnode. [Konrad]
- Included lemans-evk-ifp-mezzanine patch: https://lore.kernel.org/lkml/20260219-enable-edp2-3-lemans-evk-mezzanine-v1-1-969316806538@oss.qualcomm.com/ [Konrad]
- Link to v4: https://lore.kernel.org/all/20260226111322.250176-1-quic_mkuntuma@quicinc.com/

Change in v4:
- Moved the OPP tables for DP and MDP one level up to make them common for both nodes. [Dmitry]
- Added an explanation for enabling dispcc1 in the commit message. [Dmitry]
- Removed unnecessary blank lines preceding 'reg'. [Konrad]
- Link to v3: https://lore.kernel.org/all/20260217071420.2240380-1-mkuntuma@qti.qualcomm.com/

Change in v3:
- Patchset v2 [1/3] got merged
  https://gitlab.freedesktop.org/lumag/msm/-/commit/1338e8ae4084
- Rebased on top of linux-next and picked the latest patch from the dependent series.
- Removed additional instance of opp table [Dmitry]
- Link to v2: https://lore.kernel.org/all/20251125105622.1755651-1-quic_mkuntuma@quicinc.com/

Change in v2:
- Added fixes tag for the DP driver patch [Dmitry]
- Included below patch in this series after addressing comments [Dmitry and Konrad]
  https://lore.kernel.org/all/20250925-lemans_dual-v1-1-9c371803198d@oss.qualcomm.com/
	- Removed the misleading comment: "same path used twice" [Konrad]
	- Removed unused label in 'display-controller' [Dmitry]
- Removed extra zeroes in dispcc1 node [Konrad]
- Enbaled dispcc1 by default in main dtsi file [Dmitry]
- Added EDP ref clock and updated dependency series.
- Link to v1: https://lore.kernel.org/all/20250926085956.2346179-1-quic_mkuntuma@quicinc.com/

---

Mani Chandana Ballary Kuntumalla (2):
  arm64: dts: qcom: lemans: add mdss1 display device nodes
  arm64: dts: qcom: lemans-ride: Enable mdss1 display Port

Vishnu Saini (1):
  arm64: dts: qcom: lemans-evk-ifp-mezzanine: Enable mdss1 display Port

 .../dts/qcom/lemans-evk-ifp-mezzanine.dtso    |  74 +++++
 .../boot/dts/qcom/lemans-ride-common.dtsi     |  80 +++++
 arch/arm64/boot/dts/qcom/lemans.dtsi          | 289 ++++++++++++++++--
 3 files changed, 416 insertions(+), 27 deletions(-)

-- 
2.34.1