On 3/26/26 10:59, Ronald Claveau wrote:
> Add device tree nodes for the three MMC controllers available
> on the Amlogic T7 SoC, using amlogic,meson-axg-mmc as fallback compatible.
> All nodes are disabled by default and should be
> enabled in the board-specific DTS file.
>
> Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
> ---
> arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 39 +++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> index 36d13371f56ba..fe1ced0a58967 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> @@ -374,6 +374,45 @@ sec_ao: ao-secure@10220 {
> reg = <0x0 0x10220 0x0 0x140>;
> amlogic,has-chip-id;
> };
> +
> + sd_emmc_a: mmc@88000 {
> + compatible = "amlogic,t7-mmc", "amlogic,meson-axg-mmc";
> + reg = <0x0 0x88000 0x0 0x800>;
> + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>,
> + <&clkc_periphs CLKID_SD_EMMC_A>,
> + <&scmi_clk CLKID_FCLK_DIV2>;
> + clock-names = "core", "clkin0", "clkin1";
> + assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_A_SEL>;
> + assigned-clock-parents = <&xtal>;
> + status = "disabled";
> + };
> +
> + sd_emmc_b: mmc@8a000 {
> + compatible = "amlogic,t7-mmc", "amlogic,meson-axg-mmc";
> + reg = <0x0 0x8a000 0x0 0x800>;
> + interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>,
> + <&clkc_periphs CLKID_SD_EMMC_B>,
> + <&scmi_clk CLKID_FCLK_DIV2>;
> + clock-names = "core", "clkin0", "clkin1";
> + assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_B_SEL>;
> + assigned-clock-parents = <&xtal>;
> + status = "disabled";
> + };
> +
> + sd_emmc_c: mmc@8c000 {
> + compatible = "amlogic,t7-mmc", "amlogic,meson-axg-mmc";
> + reg = <0x0 0x8c000 0x0 0x800>;
> + interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>,
> + <&clkc_periphs CLKID_SD_EMMC_C>,
> + <&scmi_clk CLKID_FCLK_DIV2>;
> + clock-names = "core", "clkin0", "clkin1";
> + assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_C_SEL>;
> + assigned-clock-parents = <&xtal>;
> + status = "disabled";
> + };
> };
>
> };
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Thanks,
Neil