Add the nodes and the pinctrl for the CCI I2C busses on the Milos SoC.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/milos.dtsi | 194 ++++++++++++++++++++++++++++++++++++
 1 file changed, 194 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi b/arch/arm64/boot/dts/qcom/milos.dtsi
index 35248fa30747..4dbcd0147587 100644
--- a/arch/arm64/boot/dts/qcom/milos.dtsi
+++ b/arch/arm64/boot/dts/qcom/milos.dtsi
@@ -1742,6 +1742,72 @@ videocc: clock-controller@aaf0000 {
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac15000 {
+			compatible = "qcom,milos-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac15000 0x0 0x1000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING 0>;
+			power-domains = <&camcc CAM_CC_CAMSS_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "soc_ahb",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,milos-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac16000 0x0 0x1000>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING 0>;
+			power-domains = <&camcc CAM_CC_CAMSS_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "soc_ahb",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+			pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@adb0000 {
 			compatible = "qcom,milos-camcc";
 			reg = <0x0 0x0adb0000 0x0 0x40000>;
@@ -1989,6 +2055,134 @@ data-pins {
 					bias-pull-up;
 				};
 			};
+
+			cci0_0_default: cci0-0-default-state {
+				sda-pins {
+					pins = "gpio88";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio89";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				sda-pins {
+					pins = "gpio88";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio89";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				sda-pins {
+					pins = "gpio90";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio91";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				sda-pins {
+					pins = "gpio90";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio91";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				sda-pins {
+					pins = "gpio92";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio93";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				sda-pins {
+					pins = "gpio92";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio93";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_1_default: cci1-1-default-state {
+				sda-pins {
+					pins = "gpio94";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio95";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci1_1_sleep: cci1-1-sleep-state {
+				sda-pins {
+					pins = "gpio94";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio95";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
 		};
 
 		apps_smmu: iommu@15000000 {

-- 
2.53.0