This series adds device tree overlay support for enabling ICSSG0 dual EMAC
on the AM642 EVM, along with the necessary PHY driver configuration.

The overlay enables both ICSSG0 Ethernet interfaces (port0 and port1) in
dual EMAC mode and can be combined with the existing ICSSG1 overlay to
enable all four ICSSG interfaces if needed.

The series also enables the DP83TG720 PHY driver required for the
DP83TG720-IND-SPE-EVM daughter card used with the ICSSG0 interface.

v2: https://lore.kernel.org/all/20260228113203.498839-1-m-malladi@ti.com/
logs: https://gist.github.com/MeghanaMalladiTI/20e9e661c3e1075694097bc02f5a3916

Meghana Malladi (2):
  arm64: dts: ti: k3-am642-evm: Add ICSSG0 overlay for dual EMAC support
  arm64: defconfig: Enable DP83TG720 PHY driver

 arch/arm64/boot/dts/ti/Makefile               |   4 +
 .../boot/dts/ti/k3-am642-evm-icssg0.dtso      | 168 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 3 files changed, 173 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso


base-commit: 0bcac7b11262557c990da1ac564d45777eb6b005
-- 
2.43.0

Hi Meghana Malladi,

On Wed, 11 Mar 2026 11:08:50 +0530, Meghana Malladi wrote:
> This series adds device tree overlay support for enabling ICSSG0 dual EMAC
> on the AM642 EVM, along with the necessary PHY driver configuration.
> 
> The overlay enables both ICSSG0 Ethernet interfaces (port0 and port1) in
> dual EMAC mode and can be combined with the existing ICSSG1 overlay to
> enable all four ICSSG interfaces if needed.
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/2] arm64: dts: ti: k3-am642-evm: Add ICSSG0 overlay for dual EMAC support
      commit: 8bafdf5dd89b961b698d8bd2cfcebc8e4d3764fd

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh