For older targets like sc7280, we see reading DBI after sending PME
turn off message is causing NOC error.

To avoid unsafe DBI accesses, introduce qcom_pcie_get_ltssm(), which
retrieves the LTSSM state from the PARF_LTSSM register instead.

This helper is used in place of direct DBI-based link state checks in
the D3cold path after sending PME turn-off message, ensuring the LTSSM
state can be queried safely even after DBI access is no longer valid.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 67a16af69ddc75fca1b123e70715e692a91a9135..b00bf46637a5ff803a845719c5b0b5b82739244b 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -131,6 +131,7 @@
 
 /* PARF_LTSSM register fields */
 #define LTSSM_EN				BIT(8)
+#define PARF_LTSSM_STATE_MASK			GENMASK(5, 0)
 
 /* PARF_NO_SNOOP_OVERRIDE register fields */
 #define WR_NO_SNOOP_OVERRIDE_EN			BIT(1)
@@ -1255,6 +1256,16 @@ static bool qcom_pcie_link_up(struct dw_pcie *pci)
 	return val & PCI_EXP_LNKSTA_DLLLA;
 }
 
+static enum dw_pcie_ltssm qcom_pcie_get_ltssm(struct dw_pcie *pci)
+{
+	struct qcom_pcie *pcie = to_qcom_pcie(pci);
+	u32 val;
+
+	val = readl(pcie->parf + PARF_LTSSM);
+
+	return (enum dw_pcie_ltssm)FIELD_GET(PARF_LTSSM_STATE_MASK, val);
+}
+
 static void qcom_pcie_phy_power_off(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_port *port;
@@ -1507,6 +1518,7 @@ static const struct qcom_pcie_cfg cfg_fw_managed = {
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = qcom_pcie_link_up,
 	.start_link = qcom_pcie_start_link,
+	.get_ltssm = qcom_pcie_get_ltssm,
 };
 
 static int qcom_pcie_icc_init(struct qcom_pcie *pcie)

-- 
2.34.1