From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Add device tree support for the NXP S32N79 automotive SoC [1].
The S32N79 features eight Arm Cortex-A78AE cores organized in four
dual-core clusters, with a three-level cache hierarchy (L1/L2 per core,
L3 per dual-core cluster) and 32GB of DRAM memory. It includes an SMMUv3
for IOMMU functionality.
On S32N79 SoC, peripherals are organized into subsystems, such as:
- CIS (Coherent Interconnect Subsystem)
- COSS (Connectivity Subsystem)
- FSS (Foundation Subsystem)
This initial support includes basic peripherals:
- GICv3, SMMUv3 from CIS Subsystem
- PL011 UARTs and IRQ steering controller from COSS Subsystem
- uSDHC from FSS Subsystem
Clock and Pin multiplexing settings for the chip are managed over SCMI.
[1] https://www.nxp.com/products/processors-and-microcontrollers/s32-automotive-platform/s32n-vehicle-super-integration-processors:S32N
Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Co-developed-by: Andra-Teodora Ilie <andra.ilie@nxp.com>
Signed-off-by: Andra-Teodora Ilie <andra.ilie@nxp.com>
Co-developed-by: Andrei Cherechesu <andrei.cherechesu@nxp.com>
Signed-off-by: Andrei Cherechesu <andrei.cherechesu@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
---
arch/arm64/boot/dts/freescale/s32n79.dtsi | 362 ++++++++++++++++++++++
1 file changed, 362 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/s32n79.dtsi
diff --git a/arch/arm64/boot/dts/freescale/s32n79.dtsi b/arch/arm64/boot/dts/freescale/s32n79.dtsi
new file mode 100644
index 000000000000..94ab58783fdc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32n79.dtsi
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * NXP S32N79 SoC
+ *
+ * Copyright 2026 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cis-bus {
+ compatible = "simple-bus";
+ ranges = <0x4f200000 0x0 0x4f200000 0xc00000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gic: interrupt-controller@4f200000 {
+ compatible = "arm,gic-v3";
+ reg = <0x4f200000 0x10000>, /* GIC Dist */
+ <0x4f260000 0x100000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* GICR (RD_base + SGI_base) */
+ ranges;
+
+ its: msi-controller@4f240000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x4f240000 0x20000>;
+ #msi-cells = <1>;
+ msi-controller;
+ };
+ };
+
+ smmu: iommu@4fc00000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x4fc00000 0x200000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+ #iommu-cells = <1>;
+ dma-coherent;
+ status = "disabled";
+ };
+ };
+
+ coss-bus {
+ compatible = "simple-bus";
+ ranges = <0x4a000000 0x0 0x4a000000 0xff0000>,
+ <0x4e000000 0x0 0x4e000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial@4a030000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x4a030000 0x1000>;
+ interrupt-parent = <&irqsteer_coss>;
+ interrupts = <264>;
+ clocks = <&clks 0x9a>, <&clks 0x9a>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart5: serial@4a060000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x4a060000 0x1000>;
+ interrupt-parent = <&irqsteer_coss>;
+ interrupts = <269>;
+ clocks = <&clks 0x9a>, <&clks 0x9a>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart6: serial@4aa30000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x4aa30000 0x1000>;
+ interrupt-parent = <&irqsteer_coss>;
+ interrupts = <270>;
+ clocks = <&clks 0x9a>, <&clks 0x9a>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart7: serial@4aa40000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x4aa40000 0x1000>;
+ interrupt-parent = <&irqsteer_coss>;
+ interrupts = <271>;
+ clocks = <&clks 0x9a>, <&clks 0x9a>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ irqsteer_coss: interrupt-controller@4ed00000 {
+ compatible = "nxp,s32n79-irqsteer";
+ reg = <0x4ed00000 0x10000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 0x9a>;
+ clock-names = "ipg";
+ fsl,channel = <0>;
+ fsl,num-irqs = <512>;
+ status = "disabled";
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu2>;
+ };
+
+ core1 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+
+ core1 {
+ cpu = <&cpu5>;
+ };
+ };
+
+ cluster3 {
+ core0 {
+ cpu = <&cpu6>;
+ };
+
+ core1 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ cache-size = <524288>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ cache-size = <524288>;
+ cache-unified;
+ next-level-cache = <&l3_1>;
+ };
+
+ l2_2: l2-cache2 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ cache-size = <524288>;
+ cache-unified;
+ next-level-cache = <&l3_2>;
+ };
+
+ l2_3: l2-cache3 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ cache-size = <524288>;
+ cache-unified;
+ next-level-cache = <&l3_3>;
+ };
+
+ l3_0: l3-cache0 {
+ compatible = "cache";
+ cache-level = <3>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-size = <1048576>;
+ cache-unified;
+ };
+
+ l3_1: l3-cache1 {
+ compatible = "cache";
+ cache-level = <3>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-size = <1048576>;
+ cache-unified;
+ };
+
+ l3_2: l3-cache2 {
+ compatible = "cache";
+ cache-level = <3>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-size = <1048576>;
+ cache-unified;
+ };
+
+ l3_3: l3-cache3 {
+ compatible = "cache";
+ cache-level = <3>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-size = <1048576>;
+ cache-unified;
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&l2_0>;
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a78ae";
+ reg = <0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&l2_0>;
+ };
+
+ cpu2: cpu@10000 {
+ compatible = "arm,cortex-a78ae";
+ reg = <0x10000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&l2_1>;
+ };
+
+ cpu3: cpu@10100 {
+ compatible = "arm,cortex-a78ae";
+ reg = <0x10100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&l2_1>;
+ };
+
+ cpu4: cpu@20000 {
+ compatible = "arm,cortex-a78ae";
+ reg = <0x20000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&l2_2>;
+ };
+
+ cpu5: cpu@20100 {
+ compatible = "arm,cortex-a78ae";
+ reg = <0x20100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&l2_2>;
+ };
+
+ cpu6: cpu@30000 {
+ compatible = "arm,cortex-a78ae";
+ reg = <0x30000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&l2_3>;
+ };
+
+ cpu7: cpu@30100 {
+ compatible = "arm,cortex-a78ae";
+ reg = <0x30100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&l2_3>;
+ };
+ };
+
+ firmware {
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ scmi: scmi {
+ compatible = "arm,scmi-smc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ shmem = <&scmi_shbuf>;
+ arm,smc-id = <0xc20000fe>;
+ status = "okay";
+
+ clks: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ fss-bus {
+ compatible = "simple-bus";
+ ranges = <0x5b490000 0x0 0x5b490000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ usdhc0: mmc@5b490000 {
+ compatible = "nxp,s32n79-usdhc";
+ reg = <0x5b490000 0x1000>;
+ interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 0x58>, <&clks 0x50>, <&clks 0x5f>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <8>;
+ status = "disabled";
+ };
+ };
+
+ pmu: pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer: timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
--
2.43.0© 2016 - 2026 Red Hat, Inc.