Correct the grammar in dev_err() messages. Change "Not support <feature>..."
to "<feature> unsupported..." to improve readability and comply with
standard English usage.

Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
 drivers/pinctrl/realtek/pinctrl-rtd.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/pinctrl/realtek/pinctrl-rtd.c b/drivers/pinctrl/realtek/pinctrl-rtd.c
index 382bdae54bf3..5888a36babba 100644
--- a/drivers/pinctrl/realtek/pinctrl-rtd.c
+++ b/drivers/pinctrl/realtek/pinctrl-rtd.c
@@ -293,14 +293,14 @@ static int rtd_pconf_parse_conf(struct rtd_pinctrl *data,
 
 	config_desc = rtd_pinctrl_find_config(data, pinnr);
 	if (!config_desc) {
-		dev_err(data->dev, "Not support pin config for pin: %s\n", name);
+		dev_err(data->dev, "Pin config unsupported for pin: %s\n", name);
 		return -ENOTSUPP;
 	}
 	switch ((u32)param) {
 	case PIN_CONFIG_INPUT_SCHMITT:
 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
 		if (config_desc->smt_offset == NA) {
-			dev_err(data->dev, "Not support input schmitt for pin: %s\n", name);
+			dev_err(data->dev, "Input schmitt unsupported for pin: %s\n", name);
 			return -ENOTSUPP;
 		}
 		smt_off = config_desc->base_bit + config_desc->smt_offset;
@@ -313,7 +313,7 @@ static int rtd_pconf_parse_conf(struct rtd_pinctrl *data,
 
 	case PIN_CONFIG_DRIVE_PUSH_PULL:
 		if (config_desc->pud_en_offset == NA) {
-			dev_err(data->dev, "Not support push pull for pin: %s\n", name);
+			dev_err(data->dev, "Push pull unsupported for pin: %s\n", name);
 			return -ENOTSUPP;
 		}
 		pulen_off = config_desc->base_bit + config_desc->pud_en_offset;
@@ -325,7 +325,7 @@ static int rtd_pconf_parse_conf(struct rtd_pinctrl *data,
 
 	case PIN_CONFIG_BIAS_DISABLE:
 		if (config_desc->pud_en_offset == NA) {
-			dev_err(data->dev, "Not support bias disable for pin: %s\n", name);
+			dev_err(data->dev, "Bias disable unsupported for pin: %s\n", name);
 			return -ENOTSUPP;
 		}
 		pulen_off = config_desc->base_bit + config_desc->pud_en_offset;
@@ -337,7 +337,7 @@ static int rtd_pconf_parse_conf(struct rtd_pinctrl *data,
 
 	case PIN_CONFIG_BIAS_PULL_UP:
 		if (config_desc->pud_en_offset == NA) {
-			dev_err(data->dev, "Not support bias pull up for pin:%s\n", name);
+			dev_err(data->dev, "Bias pull up unsupported for pin:%s\n", name);
 			return -ENOTSUPP;
 		}
 		pulen_off = config_desc->base_bit + config_desc->pud_en_offset;
@@ -350,7 +350,7 @@ static int rtd_pconf_parse_conf(struct rtd_pinctrl *data,
 
 	case PIN_CONFIG_BIAS_PULL_DOWN:
 		if (config_desc->pud_en_offset == NA) {
-			dev_err(data->dev, "Not support bias pull down for pin: %s\n", name);
+			dev_err(data->dev, "Bias pull down unsupported for pin: %s\n", name);
 			return -ENOTSUPP;
 		}
 		pulen_off = config_desc->base_bit + config_desc->pud_en_offset;
@@ -384,7 +384,7 @@ static int rtd_pconf_parse_conf(struct rtd_pinctrl *data,
 				return -EINVAL;
 			break;
 		case NA:
-			dev_err(data->dev, "Not support drive strength for pin: %s\n", name);
+			dev_err(data->dev, "Drive strength unsupported for pin: %s\n", name);
 			return -ENOTSUPP;
 		default:
 			return -EINVAL;
@@ -394,7 +394,7 @@ static int rtd_pconf_parse_conf(struct rtd_pinctrl *data,
 
 	case PIN_CONFIG_POWER_SOURCE:
 		if (config_desc->power_offset == NA) {
-			dev_err(data->dev, "Not support power source for pin: %s\n", name);
+			dev_err(data->dev, "Power source unsupported for pin: %s\n", name);
 			return -ENOTSUPP;
 		}
 		reg_off = config_desc->reg_offset;
@@ -411,7 +411,7 @@ static int rtd_pconf_parse_conf(struct rtd_pinctrl *data,
 	case RTD_DRIVE_STRENGH_P:
 		sconfig_desc = rtd_pinctrl_find_sconfig(data, pinnr);
 		if (!sconfig_desc) {
-			dev_err(data->dev, "Not support P driving for pin: %s\n", name);
+			dev_err(data->dev, "P driving unsupported for pin: %s\n", name);
 			return -ENOTSUPP;
 		}
 		set_val = arg;
@@ -428,7 +428,7 @@ static int rtd_pconf_parse_conf(struct rtd_pinctrl *data,
 	case RTD_DRIVE_STRENGH_N:
 		sconfig_desc = rtd_pinctrl_find_sconfig(data, pinnr);
 		if (!sconfig_desc) {
-			dev_err(data->dev, "Not support N driving for pin: %s\n", name);
+			dev_err(data->dev, "N driving unsupported for pin: %s\n", name);
 			return -ENOTSUPP;
 		}
 		set_val = arg;
@@ -445,7 +445,7 @@ static int rtd_pconf_parse_conf(struct rtd_pinctrl *data,
 	case RTD_DUTY_CYCLE:
 		sconfig_desc = rtd_pinctrl_find_sconfig(data, pinnr);
 		if (!sconfig_desc || sconfig_desc->dcycle_offset == NA) {
-			dev_err(data->dev, "Not support duty cycle for pin: %s\n", name);
+			dev_err(data->dev, "Duty cycle unsupported for pin: %s\n", name);
 			return -ENOTSUPP;
 		}
 		set_val = arg;
-- 
2.34.1