The third PCIe controller on Glymur SoC supports 8-lane operation via
bifurcation of two PHYs (each requires separate power domian, resets and
aux clk).

Add dedicated reset/no_csr reset list ("phy_b", "phy_b_nocsr") and
clock ("phy_b_aux") required for 8-lane operation. Introduce new
glymur_qmp_gen5x8_pciephy_cfg configuration to enable PCIe Gen5 x8 mode.

Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 6b6c10218229b74540e520c6fe9fd1f890480b68..29bc0fe5ce37ecd6307da97d4e091b3a52074d2b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -3378,7 +3378,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 
 /* list of clocks required by phy */
 static const char * const qmp_pciephy_clk_l[] = {
-	"aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux",
+	"aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux", "phy_b_aux",
 };
 
 /* list of regulators */
@@ -3403,6 +3403,14 @@ static const char * const sm8550_pciephy_nocsr_reset_l[] = {
 	"phy_nocsr",
 };
 
+static const char * const glymur_pciephy_reset_l[] = {
+	"phy", "phy_b"
+};
+
+static const char * const glymur_pciephy_nocsr_reset_l[] = {
+	"phy_nocsr", "phy_b_nocsr",
+};
+
 static const struct qmp_pcie_offsets qmp_pcie_offsets_qhp = {
 	.serdes		= 0,
 	.pcs		= 0x1800,
@@ -4707,6 +4715,23 @@ static const struct qmp_phy_cfg glymur_qmp_gen4x2_pciephy_cfg = {
 	.phy_status		= PHYSTATUS_4_20,
 };
 
+static const struct qmp_phy_cfg glymur_qmp_gen5x8_pciephy_cfg = {
+	.lanes = 8,
+
+	.offsets		= &qmp_pcie_offsets_v8_50,
+
+	.reset_list		= glymur_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(glymur_pciephy_reset_l),
+	.nocsr_reset_list	= glymur_pciephy_nocsr_reset_l,
+	.num_nocsr_resets	= ARRAY_SIZE(glymur_pciephy_nocsr_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+
+	.regs			= pciephy_v8_50_regs_layout,
+
+	.phy_status		= PHYSTATUS_4_20,
+};
+
 static void qmp_pcie_init_port_b(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tbls *tbls)
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -5484,6 +5509,9 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
 	}, {
 		.compatible = "qcom,glymur-qmp-gen5x4-pcie-phy",
 		.data = &glymur_qmp_gen5x4_pciephy_cfg,
+	}, {
+		.compatible = "qcom,glymur-qmp-gen5x8-pcie-phy",
+		.data = &glymur_qmp_gen5x8_pciephy_cfg,
 	}, {
 		.compatible = "qcom,ipq6018-qmp-pcie-phy",
 		.data = &ipq6018_pciephy_cfg,

-- 
2.34.1