From: Chuan Liu <chuan.liu@amlogic.com>
Add dt-binding documentation for standardized model clock control units
in A9 SoC family.
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
---
.../bindings/clock/amlogic,a9-model-ccu.yaml | 435 +++++++++++++++++++++
1 file changed, 435 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,a9-model-ccu.yaml b/Documentation/devicetree/bindings/clock/amlogic,a9-model-ccu.yaml
new file mode 100644
index 000000000000..56c5cbe1b246
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,a9-model-ccu.yaml
@@ -0,0 +1,435 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2026 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a9-model-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A9 Family Standardized Model Clock Control Unit
+
+maintainers:
+ - Chuan Liu <chuan.liu@amlogic.com>
+
+description:
+ The clock tree within the A9 is composed of numerous instances of these
+ standardized model CCU (Clock Control Units).
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: amlogic,a9-composite-ccu
+ description: Supports clock source selection, frequency division, and
+ clock gating.
+ - items:
+ - const: amlogic,a9-composite-ccu-mult
+ description: Some modules have multiple input clocks and contain
+ multiple composite-ccus internally.
+ - items:
+ - const: amlogic,a9-noglitch-ccu
+ description: Provides the same functionality as composite-ccu but
+ includes glitch suppression during frequency transitions.
+ - items:
+ - const: amlogic,a9-noglitch-ccu-mult
+ description: Some modules have multiple input clocks and contain
+ multiple noglitch-ccus internally.
+ - items:
+ - const: amlogic,a9-sysbus-ccu
+ description: Consists of multiple gating arrays, commonly used for
+ Amlogic's sys_clk and axi_clk.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 16
+
+ clock-names:
+ minItems: 1
+ maxItems: 16
+
+ clock-output-names:
+ minItems: 1
+ # The sysbus-ccu of A9 supports up to 128 gates
+ maxItems: 128
+
+ '#clock-cells':
+ description:
+ The clock controller of a module may contain one or more CCU(s). When a
+ clock controller has multiple CCUs, an index is required to specify a
+ particular CCU within the clock controller.
+ oneOf:
+ - const: 0
+ description: Single clock output, no specifier needed
+ - const: 1
+ description: Multiple clocks, index selects specific output
+
+ amlogic,clock-max-frequency:
+ description: |
+ Each clock's maximum output frequency is constrained during hardware
+ design to ensure proper timing requirements for the clock network. If the
+ clock frequency configured exceeds this design limit, it can lead to
+ abnormal behavior in modules relying on that clock and may even cause
+ cross-talk that affects other modules.
+
+ In the driver, this property is parsed, and interface functions from the
+ CCF are called to enforce the clock's maximum frequency, preventing
+ potential issues caused by excessive clock frequency configurations.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ amlogic,reg-layout:
+ description:
+ These standardized model CCUs require register configuration for their
+ clock functions. This property node describes the register layout
+ parameters for each model's CCU.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ anyOf:
+ - contains:
+ const: amlogic,a9-composite-ccu
+ - contains:
+ const: amlogic,a9-noglitch-ccu
+ then:
+ properties:
+ '#clock-cells':
+ const: 0
+ clock-output-names:
+ minItems: 1
+ maxItems: 1
+ else:
+ properties:
+ '#clock-cells':
+ const: 1
+ clock-output-names:
+ minItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amlogic,a9-composite-ccu
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ items:
+ - description: input clock source 0
+ - description: input clock source 1 (optional)
+ - description: input clock source 2 (optional)
+ - description: input clock source 3 (optional)
+ - description: input clock source 4 (optional)
+ - description: input clock source 5 (optional)
+ - description: input clock source 6 (optional)
+ - description: input clock source 7 (optional)
+ clock-names:
+ minItems: 1
+ items:
+ - const: clkin0
+ - const: clkin1
+ - const: clkin2
+ - const: clkin3
+ - const: clkin4
+ - const: clkin5
+ - const: clkin6
+ - const: clkin7
+ amlogic,reg-layout:
+ description: |
+ composite-ccu contains three register layout parameters:
+ * register offset
+ * bit offset
+ * divider effective bit width
+ required:
+ - amlogic,reg-layout
+ - clock-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amlogic,a9-composite-ccu-mult
+ then:
+ properties:
+ clocks:
+ description:
+ Some clock controllers contain two composite-ccus (labeled
+ composite_a and composite_b). In certain controllers, composite_a
+ and composite_b share a common clock source, while in others they
+ have independent clock sources.
+ minItems: 1
+ items:
+ - description: composite_a/b's input clock source 0
+ - description: composite_a/b's input clock source 1 (optional)
+ - description: composite_a/b's input clock source 2 (optional)
+ - description: composite_a/b's input clock source 3 (optional)
+ - description: composite_a/b's input clock source 4 (optional)
+ - description: composite_a/b's input clock source 5 (optional)
+ - description: composite_a/b's input clock source 6 (optional)
+ - description: composite_a/b's input clock source 7 (optional)
+ - description: composite_b's input clock source 0 (optional)
+ - description: composite_b's input clock source 1 (optional)
+ - description: composite_b's input clock source 2 (optional)
+ - description: composite_b's input clock source 3 (optional)
+ - description: composite_b's input clock source 4 (optional)
+ - description: composite_b's input clock source 5 (optional)
+ - description: composite_b's input clock source 6 (optional)
+ - description: composite_b's input clock source 7 (optional)
+ clock-names:
+ minItems: 1
+ items:
+ - const: clkin0
+ - const: clkin1
+ - const: clkin2
+ - const: clkin3
+ - const: clkin4
+ - const: clkin5
+ - const: clkin6
+ - const: clkin7
+ - const: bclkin0
+ - const: bclkin1
+ - const: bclkin2
+ - const: bclkin3
+ - const: bclkin4
+ - const: bclkin5
+ - const: bclkin6
+ - const: bclkin7
+ amlogic,reg-layout:
+ description: |
+ composite-ccu contains three register layout parameters:
+ * register offset
+ * bit offset
+ * divider effective bit width
+ required:
+ - amlogic,reg-layout
+ - clock-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amlogic,a9-noglitch-ccu
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ items:
+ - description: input clock source 0
+ - description: input clock source 1 (optional)
+ - description: input clock source 2 (optional)
+ - description: input clock source 3 (optional)
+ - description: input clock source 4 (optional)
+ - description: input clock source 5 (optional)
+ - description: input clock source 6 (optional)
+ - description: input clock source 7 (optional)
+ clock-names:
+ minItems: 1
+ items:
+ - const: clkin0
+ - const: clkin1
+ - const: clkin2
+ - const: clkin3
+ - const: clkin4
+ - const: clkin5
+ - const: clkin6
+ - const: clkin7
+ required:
+ - clock-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amlogic,a9-noglitch-ccu-mult
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ items:
+ - description: input clock source 0
+ - description: input clock source 1 (optional)
+ - description: input clock source 2 (optional)
+ - description: input clock source 3 (optional)
+ - description: input clock source 4 (optional)
+ - description: input clock source 5 (optional)
+ - description: input clock source 6 (optional)
+ - description: input clock source 7 (optional)
+ clock-names:
+ minItems: 1
+ items:
+ - const: clkin0
+ - const: clkin1
+ - const: clkin2
+ - const: clkin3
+ - const: clkin4
+ - const: clkin5
+ - const: clkin6
+ - const: clkin7
+ amlogic,reg-layout:
+ description: |
+ composite-ccu contains one register layout parameters:
+ * register offset
+ required:
+ - amlogic,reg-layout
+ - clock-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amlogic,a9-sysbus-ccu
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ description: input clock of sysbus-ccu
+ amlogic,reg-layout:
+ description: |
+ composite-ccu contains two register layout parameters:
+ * register offset
+ * bit offset
+ required:
+ - amlogic,reg-layout
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-output-names
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ clk_dummy: clock-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "dummy";
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ clock-controller@350 {
+ compatible = "amlogic,a9-composite-ccu";
+ reg = <0x0 0x350 0x0 0x4>;
+ #clock-cells = <0>;
+ amlogic,clock-max-frequency = <50000000>;
+ amlogic,reg-layout = <0x0 0 7>;
+ clock-output-names = "sar_adc";
+ clocks = <&xtal_24m>,
+ <&scmi_clk 17>;
+ clock-names = "clkin0", "clkin1";
+ };
+
+ clock-controller@290 {
+ compatible = "amlogic,a9-composite-ccu-mult";
+ reg = <0x0 0x290 0x0 0x8>;
+ #clock-cells = <1>;
+ amlogic,clock-max-frequency = <250000000>,
+ <250000000>,
+ <1200000000>;
+ amlogic,reg-layout = <0x0 0 7>,
+ <0x0 16 7>,
+ <0x4 0 7>;
+ clock-output-names = "sd_emmc_a",
+ "sd_emmc_b",
+ "sd_emmc_c";
+ clocks = <&xtal_24m>,
+ <&scmi_clk 6>,
+ <&scmi_clk 10>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2";
+ };
+
+ clock-controller@378 {
+ compatible = "amlogic,a9-composite-ccu-mult";
+ reg = <0x0 0x378 0x0 0x4>;
+ #clock-cells = <1>;
+ amlogic,clock-max-frequency = <500000000>,
+ <667000000>;
+ amlogic,reg-layout = <0x0 0 7>,
+ <0x0 16 7>;
+ clock-output-names = "dptx_apb2",
+ "dptx_aud";
+ clocks = <&xtal_24m>,
+ <&scmi_clk 17>,
+ <&scmi_clk 12>,
+ <&scmi_clk 14>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&xtal_24m>, /* composite-ccu_b's clock source 0 */
+ <&scmi_clk 17>, /* composite-ccu_b's clock source 1 */
+ <&scmi_clk 10>, /* composite-ccu_b's clock source 2 */
+ <&scmi_clk 12>; /* composite-ccu_b's clock source 3 */
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3",
+ "clkin4",
+ "clkin5",
+ "clkin6",
+ "clkin7",
+ "bclkin0",
+ "bclkin1",
+ "bclkin2",
+ "bclkin3";
+ };
+
+ clock-controller@420 {
+ compatible = "amlogic,a9-noglitch-ccu";
+ reg = <0x0 0x420 0x0 0x4>;
+ #clock-cells = <0>;
+ amlogic,clock-max-frequency = <800000000>;
+ clock-output-names = "dspa";
+ clocks = <&xtal_24m>,
+ <&scmi_clk 8>,
+ <&scmi_clk 10>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2";
+ };
+
+ clock-controller@400 {
+ compatible = "amlogic,a9-noglitch-ccu-mult";
+ reg = <0x0 0x400 0x0 0x8>;
+ #clock-cells = <1>;
+ /*
+ * If only one maximum frequency is specified, it is shared by all
+ * clocks under the current device node.
+ */
+ amlogic,clock-max-frequency = <1000000000>;
+ amlogic,reg-layout = <0x0>,
+ <0x4>;
+ clock-output-names = "mali",
+ "mali_stack";
+ clocks = <&xtal_24m>,
+ <&scmi_clk 23>,
+ <&scmi_clk 6>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2";
+ };
+
+ clock-sysbus@230 {
+ compatible = "amlogic,a9-sysbus-ccu";
+ reg = <0x0 0x230 0x0 0x10>;
+ #clock-cells = <1>;
+ amlogic,reg-layout = <0 0>,
+ <0 1>,
+ <0 3>;
+ clock-output-names = "sys_am_axi",
+ "sys_dos",
+ "sys_mipi_dsi";
+ clocks = <&scmi_clk 17>;
+ };
+ };
--
2.42.0On 09/02/2026 06:48, Chuan Liu via B4 Relay wrote:
> +additionalProperties: false
> +
> +examples:
> + - |
> + clk_dummy: clock-dummy {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + clock-output-names = "dummy";
> + status = "disabled";
Eee, nope. Please review this internally so you won't be making such
trivial mistakes.
Best regards,
Krzysztof
On 09/02/2026 06:48, Chuan Liu via B4 Relay wrote:
> From: Chuan Liu <chuan.liu@amlogic.com>
>
> Add dt-binding documentation for standardized model clock control units
> in A9 SoC family.
>
> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
> ---
> .../bindings/clock/amlogic,a9-model-ccu.yaml | 435 +++++++++++++++++++++
> 1 file changed, 435 insertions(+)
Brief review, you still have to read basic guidelines to not repeat the
basic mistakes.
>
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a9-model-ccu.yaml b/Documentation/devicetree/bindings/clock/amlogic,a9-model-ccu.yaml
> new file mode 100644
> index 000000000000..56c5cbe1b246
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,a9-model-ccu.yaml
> @@ -0,0 +1,435 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2026 Amlogic, Inc. All rights reserved
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/amlogic,a9-model-ccu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic A9 Family Standardized Model Clock Control Unit
> +
> +maintainers:
> + - Chuan Liu <chuan.liu@amlogic.com>
> +
> +description:
> + The clock tree within the A9 is composed of numerous instances of these
> + standardized model CCU (Clock Control Units).
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
Drop
> + - const: amlogic,a9-composite-ccu
> + description: Supports clock source selection, frequency division, and
> + clock gating.
This is just one big enum. You can add comments if you insist...
> + - items:
> + - const: amlogic,a9-composite-ccu-mult
> + description: Some modules have multiple input clocks and contain
> + multiple composite-ccus internally.
> + - items:
> + - const: amlogic,a9-noglitch-ccu
> + description: Provides the same functionality as composite-ccu but
> + includes glitch suppression during frequency transitions.
> + - items:
> + - const: amlogic,a9-noglitch-ccu-mult
> + description: Some modules have multiple input clocks and contain
> + multiple noglitch-ccus internally.
> + - items:
> + - const: amlogic,a9-sysbus-ccu
> + description: Consists of multiple gating arrays, commonly used for
> + Amlogic's sys_clk and axi_clk.
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 16
> +
> + clock-names:
> + minItems: 1
> + maxItems: 16
> +
> + clock-output-names:
> + minItems: 1
> + # The sysbus-ccu of A9 supports up to 128 gates
> + maxItems: 128
> +
> + '#clock-cells':
> + description:
> + The clock controller of a module may contain one or more CCU(s). When a
> + clock controller has multiple CCUs, an index is required to specify a
> + particular CCU within the clock controller.
Drop
> + oneOf:
> + - const: 0
> + description: Single clock output, no specifier needed
> + - const: 1
> + description: Multiple clocks, index selects specific output
Drop all descriptions. That's enum. Do not explain usu how DT works.
> +
> + amlogic,clock-max-frequency:
Drop property. So many wrong things here... First, start from basic
guidelines like talks or docs in kernel and understand the suffixes.
Second not a DT property.
> + description: |
> + Each clock's maximum output frequency is constrained during hardware
> + design to ensure proper timing requirements for the clock network. If the
> + clock frequency configured exceeds this design limit, it can lead to
> + abnormal behavior in modules relying on that clock and may even cause
> + cross-talk that affects other modules.
> +
> + In the driver, this property is parsed, and interface functions from the
Why would we care about driver?
This is binding, we talk about hardware.
> + CCF are called to enforce the clock's maximum frequency, preventing
> + potential issues caused by excessive clock frequency configurations.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> + amlogic,reg-layout:
No, drop. Compatible defines it.
> + description:
> + These standardized model CCUs require register configuration for their
> + clock functions. This property node describes the register layout
> + parameters for each model's CCU.
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + anyOf:
> + - contains:
> + const: amlogic,a9-composite-ccu
> + - contains:
> + const: amlogic,a9-noglitch-ccu
> + then:
> + properties:
> + '#clock-cells':
> + const: 0
> + clock-output-names:
> + minItems: 1
> + maxItems: 1
> + else:
> + properties:
> + '#clock-cells':
> + const: 1
> + clock-output-names:
> + minItems: 2
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: amlogic,a9-composite-ccu
> + then:
> + properties:
> + clocks:
> + minItems: 1
> + items:
> + - description: input clock source 0
> + - description: input clock source 1 (optional)
> + - description: input clock source 2 (optional)
> + - description: input clock source 3 (optional)
> + - description: input clock source 4 (optional)
> + - description: input clock source 5 (optional)
> + - description: input clock source 6 (optional)
> + - description: input clock source 7 (optional)
> + clock-names:
> + minItems: 1
> + items:
> + - const: clkin0
> + - const: clkin1
> + - const: clkin2
> + - const: clkin3
> + - const: clkin4
> + - const: clkin5
> + - const: clkin6
> + - const: clkin7
> + amlogic,reg-layout:
> + description: |
> + composite-ccu contains three register layout parameters:
> + * register offset
> + * bit offset
> + * divider effective bit width
> + required:
> + - amlogic,reg-layout
> + - clock-names
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: amlogic,a9-composite-ccu-mult
> + then:
> + properties:
> + clocks:
> + description:
> + Some clock controllers contain two composite-ccus (labeled
> + composite_a and composite_b). In certain controllers, composite_a
> + and composite_b share a common clock source, while in others they
> + have independent clock sources.
> + minItems: 1
> + items:
> + - description: composite_a/b's input clock source 0
> + - description: composite_a/b's input clock source 1 (optional)
> + - description: composite_a/b's input clock source 2 (optional)
> + - description: composite_a/b's input clock source 3 (optional)
> + - description: composite_a/b's input clock source 4 (optional)
> + - description: composite_a/b's input clock source 5 (optional)
> + - description: composite_a/b's input clock source 6 (optional)
> + - description: composite_a/b's input clock source 7 (optional)
> + - description: composite_b's input clock source 0 (optional)
> + - description: composite_b's input clock source 1 (optional)
> + - description: composite_b's input clock source 2 (optional)
> + - description: composite_b's input clock source 3 (optional)
> + - description: composite_b's input clock source 4 (optional)
> + - description: composite_b's input clock source 5 (optional)
> + - description: composite_b's input clock source 6 (optional)
> + - description: composite_b's input clock source 7 (optional)
> + clock-names:
> + minItems: 1
> + items:
> + - const: clkin0
> + - const: clkin1
> + - const: clkin2
> + - const: clkin3
> + - const: clkin4
> + - const: clkin5
> + - const: clkin6
> + - const: clkin7
> + - const: bclkin0
> + - const: bclkin1
> + - const: bclkin2
> + - const: bclkin3
> + - const: bclkin4
> + - const: bclkin5
> + - const: bclkin6
> + - const: bclkin7
> + amlogic,reg-layout:
> + description: |
> + composite-ccu contains three register layout parameters:
> + * register offset
> + * bit offset
> + * divider effective bit width
> + required:
> + - amlogic,reg-layout
> + - clock-names
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: amlogic,a9-noglitch-ccu
> + then:
> + properties:
> + clocks:
> + minItems: 1
> + items:
> + - description: input clock source 0
> + - description: input clock source 1 (optional)
> + - description: input clock source 2 (optional)
> + - description: input clock source 3 (optional)
> + - description: input clock source 4 (optional)
> + - description: input clock source 5 (optional)
> + - description: input clock source 6 (optional)
> + - description: input clock source 7 (optional)
> + clock-names:
> + minItems: 1
> + items:
> + - const: clkin0
> + - const: clkin1
> + - const: clkin2
> + - const: clkin3
> + - const: clkin4
> + - const: clkin5
> + - const: clkin6
> + - const: clkin7
> + required:
> + - clock-names
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: amlogic,a9-noglitch-ccu-mult
> + then:
> + properties:
> + clocks:
> + minItems: 1
Why?
> + items:
> + - description: input clock source 0
> + - description: input clock source 1 (optional)
Drop optional. Don't repeat constraints in free form text.
> + - description: input clock source 2 (optional)
> + - description: input clock source 3 (optional)
> + - description: input clock source 4 (optional)
> + - description: input clock source 5 (optional)
> + - description: input clock source 6 (optional)
> + - description: input clock source 7 (optional)
> + clock-names:
> + minItems: 1
> + items:
> + - const: clkin0
> + - const: clkin1
> + - const: clkin2
> + - const: clkin3
> + - const: clkin4
> + - const: clkin5
> + - const: clkin6
> + - const: clkin7
> + amlogic,reg-layout:
> + description: |
> + composite-ccu contains one register layout parameters:
> + * register offset
> + required:
> + - amlogic,reg-layout
> + - clock-names
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: amlogic,a9-sysbus-ccu
> + then:
> + properties:
> + clocks:
> + maxItems: 1
> + description: input clock of sysbus-ccu
list the items with description instead.
> + amlogic,reg-layout:
> + description: |
> + composite-ccu contains two register layout parameters:
> + * register offset
> + * bit offset
> + required:
> + - amlogic,reg-layout
This is huge and amount of ifs is clearly suggesting you combined way
too much into one file.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-output-names
> + - "#clock-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + clk_dummy: clock-dummy {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + clock-output-names = "dummy";
> + status = "disabled";
> + };
Not relevant, drop entire node.
> +
> + apb {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + clock-controller@350 {
> + compatible = "amlogic,a9-composite-ccu";
> + reg = <0x0 0x350 0x0 0x4>;
> + #clock-cells = <0>;
> + amlogic,clock-max-frequency = <50000000>;
> + amlogic,reg-layout = <0x0 0 7>;
> + clock-output-names = "sar_adc";
> + clocks = <&xtal_24m>,
> + <&scmi_clk 17>;
> + clock-names = "clkin0", "clkin1";
> + };
> +
> + clock-controller@290 {
> + compatible = "amlogic,a9-composite-ccu-mult";
> + reg = <0x0 0x290 0x0 0x8>;
> + #clock-cells = <1>;
> + amlogic,clock-max-frequency = <250000000>,
> + <250000000>,
> + <1200000000>;
> + amlogic,reg-layout = <0x0 0 7>,
> + <0x0 16 7>,
> + <0x4 0 7>;
> + clock-output-names = "sd_emmc_a",
> + "sd_emmc_b",
> + "sd_emmc_c";
> + clocks = <&xtal_24m>,
> + <&scmi_clk 6>,
> + <&scmi_clk 10>;
> + clock-names = "clkin0",
> + "clkin1",
> + "clkin2";
> + };
One or two are enough. Drop the rest.
>
Best regards,
Krzysztof
© 2016 - 2026 Red Hat, Inc.