The hardware designers at my company neglected to read the datasheet for
this PHY and did not add appropriate resistors to configure it for
SGMII. Add support for configuring the it based on phy-mode instead of
relying on the resistors for a suitable default.


Sean Anderson (2):
  net: phy: dp83867: Program TX FIFO for all interfaces
  net: phy: dp83867: Always program R/SGMII enable bits

 drivers/net/phy/dp83867.c | 63 ++++++++++++++-------------------------
 1 file changed, 23 insertions(+), 40 deletions(-)

-- 
2.35.1.1320.gc452695387.dirty