Add support for USB on Glymur SoC and its Compute Reference Device.
This based on the following patch:
https://lore.kernel.org/all/20250925-v3_glymur_introduction-v1-23-24b601bbecc0@oss.qualcomm.com/
It adds the usb_2 controller on top and addresses all comments.
This unblocks the upstreaming of the display support, since 3 DP instances
rely on some clocks provided by the combo PHYs.
Sent as RFT since the latest tests have only been run on a remote-only
available device.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
Abel Vesa (1):
dt-bindings: usb: qcom,dwc3: Allow high-speed interrupt on Glymur, Hamoa and Milos
Wesley Cheng (2):
arm64: dts: qcom: glymur: Add USB related nodes
arm64: dts: qcom: glymur-crd: Enable USB support
.../devicetree/bindings/usb/qcom,snps-dwc3.yaml | 2 +-
arch/arm64/boot/dts/qcom/glymur-crd.dts | 283 +++++++++
arch/arm64/boot/dts/qcom/glymur.dtsi | 663 ++++++++++++++++++++-
3 files changed, 942 insertions(+), 6 deletions(-)
---
base-commit: f417b7ffcbef7d76b0d8860518f50dae0e7e5eda
change-id: 20260109-dts-qcom-glymur-add-usb-support-617b6d9d032c
prerequisite-message-id: 20251219-upstream_v3_glymur_introduction-v3-0-32271f1f685d@oss.qualcomm.com
prerequisite-patch-id: 2d0427a6e5a9310d8dd547eb3e2d9667ade54083
prerequisite-patch-id: adc6c3714b1636b0758d479b647389519e5199cb
prerequisite-patch-id: a60d247607692a62f8f1ad53697101f1845337d9
prerequisite-patch-id: 178e4c849a063a1e945155b6e5765150137a718c
prerequisite-message-id: 20251217055655.638594-1-anjelique.melendez@oss.qualcomm.com
prerequisite-patch-id: 41fcc7298bf432b7a268762b71dfa2fc331c9d30
prerequisite-patch-id: 79ca16f835091115da3fe81327b3f58a3818ce12
Best regards,
--
Abel Vesa <abel.vesa@oss.qualcomm.com>