On Mon, 12 Jan 2026 11:45:20 -0600
David Lechner <dlechner@baylibre.com> wrote:
> Add spi-tx-lane-map and spi-rx-lane-map properties to the SPI peripheral
> device tree binding. These properties allow specifying the mapping of
> peripheral data lanes to controller data lanes. This is needed e.g. when
> some lanes are skipped on the controller side so that the controller
> can correctly route data to/from the peripheral.
>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: David Lechner <dlechner@baylibre.com>
LGTM
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> ---
>
> v5 changes:
> - Use SDI/SDO terminology in descriptions. (Fixes incorrect use of TX/RX
> when describing the peripheral lanes.)
>
> v4 changes:
> - This replaces the data-lanes property from the previous revision. Now
> there are separate properties for tx and rx lane maps. And instead of
> being the primary property for determining the number of lanes, this
> is only needed in special cases where the mapping is non-trivial.
> ---
> .../devicetree/bindings/spi/spi-peripheral-props.yaml | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
> index 59ddead7da14..880a9f624566 100644
> --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
> @@ -75,6 +75,13 @@ properties:
> enum: [0, 1, 2, 4, 8]
> default: [1]
>
> + spi-rx-lane-map:
> + description: Mapping of peripheral SDO lanes to controller SDI lanes.
> + Each index in the array represents a peripheral SDO lane, and the value
> + at that index represents the corresponding controller SDI lane.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + default: [0, 1, 2, 3, 4, 5, 6, 7]
> +
> spi-rx-delay-us:
> description:
> Delay, in microseconds, after a read transfer.
> @@ -99,6 +106,13 @@ properties:
> enum: [0, 1, 2, 4, 8]
> default: [1]
>
> + spi-tx-lane-map:
> + description: Mapping of peripheral SDI lanes to controller SDO lanes.
> + Each index in the array represents a peripheral SDI lane, and the value
> + at that index represents the corresponding controller SDO lane.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + default: [0, 1, 2, 3, 4, 5, 6, 7]
> +
> spi-tx-delay-us:
> description:
> Delay, in microseconds, after a write transfer.
>