From: Francesco Dolcini <francesco.dolcini@toradex.com>
Add support for the NXP i.MX8QP SoC and for Apalis iMX8QP SoM mated with
Apalis Ixora and Apalis Evaluation board.
Apalis iMX8QP is a variant of the Apalis iMX8QM, using an NXP i.MX8QP
SoC instead of the i.MX8QM. The two SoCs are pin to pin compatible, with
the i.MX8QP being a lower end variant, with a slower GPU and one Cortex
A72 core instead of two.
The two Apalis SoMs variants share the same schematics and PCB, and the
iMX8QP variant exists only on revision V1.1 of board.
Link: https://www.nxp.com/products/i.MX8
Link: https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8
Francesco Dolcini (4):
dt-bindings: arm: fsl: Add Apalis iMX8QP
arm64: dts: imx8qm: Add CPU cluster labels
arm64: dts: freescale: Add NXP i.MX8QP SoC dtsi
arm64: dts: freescale: Add Apalis iMX8QP
.../devicetree/bindings/arm/fsl.yaml | 6 +++--
arch/arm64/boot/dts/freescale/Makefile | 5 ++++
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 4 +--
.../imx8qp-apalis-v1.1-eval-v1.2.dts | 26 +++++++++++++++++++
.../dts/freescale/imx8qp-apalis-v1.1-eval.dts | 16 ++++++++++++
.../imx8qp-apalis-v1.1-ixora-v1.1.dts | 16 ++++++++++++
.../imx8qp-apalis-v1.1-ixora-v1.2.dts | 16 ++++++++++++
.../dts/freescale/imx8qp-apalis-v1.1.dtsi | 16 ++++++++++++
arch/arm64/boot/dts/freescale/imx8qp.dtsi | 24 +++++++++++++++++
9 files changed, 125 insertions(+), 4 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-eval-v1.2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-eval.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-ixora-v1.1.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1-ixora-v1.2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp-apalis-v1.1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qp.dtsi
--
2.47.3