The SOFEF03-M Display-Driver-IC is paired with a amb609vp01 panel on
the Sony Xperia 5 II and amb609vp04 panel on the Sony Xperia 5 III. It
requires Display Stream Compression 1.1 which allows the panels to run
at 120Hz, even though a 60Hz mode is available too.
Downstream porch values are retained; despite not being used in
command-mode they are useful to artificially bump the clock values to
account for "transfer overhead" while that calculation is still missing
from the MSM DSI host driver.
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
MAINTAINERS | 1 +
drivers/gpu/drm/panel/Kconfig | 16 ++
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-samsung-sofef03.c | 373 ++++++++++++++++++++++++++
4 files changed, 391 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index e48dd7f5a115..28135743ca0c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8204,6 +8204,7 @@ DRM DRIVER FOR SAMSUNG SOFEF03 DDIC
M: Marijn Suijten <marijn.suijten@somainline.org>
S: Maintained
F: Documentation/devicetree/bindings/display/panel/samsung,sofef03-m.yaml
+F: drivers/gpu/drm/panel/panel-samsung-sofef03.c
DRM DRIVER FOR SHARP MEMORY LCD
M: Alex Lanzano <lanzano.alex@gmail.com>
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 2f06b48dfb89..1f148bc5b068 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -953,6 +953,22 @@ config DRM_PANEL_SAMSUNG_SOFEF01
This Display-IC features a fixed 1080x2520@60 mode.
+config DRM_PANEL_SAMSUNG_SOFEF03
+ tristate "Samsung SOFEF03-M DSI cmd mode panels"
+ depends on GPIOLIB
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select DRM_DISPLAY_DSC_HELPER
+ select DRM_DISPLAY_HELPER
+ help
+ Say Y or M here if you want to enable support for the Samsung 6.1" AMOLED
+ DSI command mode panel found in the Sony Xperia 5 II and Sony Xperia 5 III
+ smartphones (both amb609vp01 panel).
+
+ This Display-IC uses Display Stream Compression 1.1 and features a
+ 1080x2520@60 and 1080x2520@120 mode.
+
config DRM_PANEL_SEIKO_43WVF1G
tristate "Seiko 43WVF1G panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index cbd9ef23b8d8..a9636f5f433a 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA5X01_AMS561RA01) += panel-samsung-s6e8aa5x01-ams561ra01.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_SOFEF00) += panel-samsung-sofef00.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_SOFEF01) += panel-samsung-sofef01.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_SOFEF03) += panel-samsung-sofef03.o
obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ079L1SX01) += panel-sharp-lq079l1sx01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
diff --git a/drivers/gpu/drm/panel/panel-samsung-sofef03.c b/drivers/gpu/drm/panel/panel-samsung-sofef03.c
new file mode 100644
index 000000000000..f9399aab0623
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-samsung-sofef03.c
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Konrad Dybcio <konrad.dybcio@linaro.org>
+ * Copyright (c) 2023 Marijn Suijten <marijn.suijten@somainline.org>
+ *
+ * Based on the following Sony downstream DTS command sequences:
+ * - Xperia 5 II (edo pdx206): https://github.com/sonyxperiadev/kernel-copyleft-dts/blob/58.2.A.10.xxx/somc/dsi-panel-sofef03_m-fhd_plus.dtsi
+ * - Xperia 5 III (sagami pdx214): https://github.com/sonyxperiadev/kernel-copyleft-dts/blob/61.2.A.0.xxx/somc/dsi-panel-sofef03_m-amb609vp01-fhd_plus.dtsi
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/display/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
+
+#define WRITE_CONTROL_DISPLAY_BACKLIGHT BIT(5)
+
+/*
+ * TODO: This should be communicated via the mode when .prepare
+ * receives atomic commit info
+ */
+static const bool enable_120hz = true;
+
+struct samsung_sofef03_m {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi;
+ struct drm_dsc_config dsc;
+ struct regulator *vddio, *vci;
+ struct gpio_desc *reset_gpio;
+};
+
+static inline struct samsung_sofef03_m *
+to_samsung_sofef03_m(struct drm_panel *panel)
+{
+ return container_of(panel, struct samsung_sofef03_m, panel);
+}
+
+static void samsung_sofef03_m_reset(struct samsung_sofef03_m *ctx)
+{
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
+}
+
+static int samsung_sofef03_m_program(struct samsung_sofef03_m *ctx)
+{
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+
+ dsi_ctx.dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x9d, 0x01);
+
+ mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+ mipi_dsi_msleep(&dsi_ctx, 10);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x5a, 0x5a);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb0, 0x09);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xd5, 0x00, 0x00, 0x00);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xa5, 0xa5);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x5a, 0x5a);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb0, 0x08);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xee, 0x00, 0x00);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xa5, 0xa5);
+
+ mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+ mipi_dsi_dcs_set_column_address_multi(&dsi_ctx, 0, 1080 - 1);
+ mipi_dsi_dcs_set_page_address_multi(&dsi_ctx, 0, 2520 - 1);
+
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x5a, 0x5a);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xdf, 0x83);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xa5, 0xa5);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x5a, 0x5a);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb0, 0x01);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe6, 0x01);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xa5, 0xa5);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x5a, 0x5a);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb0, 0x02);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xec, 0x02, 0x00, 0x1c, 0x1c);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb0, 0x0c);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xec, 0x01, 0x19);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xa5, 0xa5);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+ WRITE_CONTROL_DISPLAY_BACKLIGHT);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x5a, 0x5a);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc2, 0x2d, 0x27);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xa5, 0xa5);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x5a, 0x5a);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x60, enable_120hz ? 0x10 : 0x00);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0xa5, 0xa5);
+ mipi_dsi_msleep(&dsi_ctx, 110);
+
+ return dsi_ctx.accum_err;
+}
+
+static int samsung_sofef03_m_prepare(struct drm_panel *panel)
+{
+ struct samsung_sofef03_m *ctx = to_samsung_sofef03_m(panel);
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+ struct drm_dsc_picture_parameter_set pps;
+ struct device *dev = &ctx->dsi->dev;
+ int ret;
+
+ ret = regulator_enable(ctx->vddio);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enable vddio regulator: %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_enable(ctx->vci);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enable vci regulator: %d\n", ret);
+ regulator_disable(ctx->vddio);
+ return ret;
+ }
+
+ samsung_sofef03_m_reset(ctx);
+
+ ret = samsung_sofef03_m_program(ctx);
+ if (ret < 0) {
+ dev_err(dev, "Failed to send on command sequence: %d\n", ret);
+ goto fail;
+ }
+
+ drm_dsc_pps_payload_pack(&pps, &ctx->dsc);
+
+ mipi_dsi_picture_parameter_set_multi(&dsi_ctx, &pps);
+ mipi_dsi_compression_mode_multi(&dsi_ctx, true);
+ mipi_dsi_msleep(&dsi_ctx, 28);
+
+ ret = dsi_ctx.accum_err;
+
+ if (ret < 0)
+ goto fail;
+
+ return 0;
+
+fail:
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_disable(ctx->vci);
+ regulator_disable(ctx->vddio);
+ return ret;
+}
+
+static int samsung_sofef03_m_enable(struct drm_panel *panel)
+{
+ struct samsung_sofef03_m *ctx = to_samsung_sofef03_m(panel);
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+
+ mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+
+ return dsi_ctx.accum_err;
+}
+
+static int samsung_sofef03_m_disable(struct drm_panel *panel)
+{
+ struct samsung_sofef03_m *ctx = to_samsung_sofef03_m(panel);
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+
+ mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+ mipi_dsi_msleep(&dsi_ctx, 20);
+
+ return dsi_ctx.accum_err;
+}
+
+static int samsung_sofef03_m_unprepare(struct drm_panel *panel)
+{
+ struct samsung_sofef03_m *ctx = to_samsung_sofef03_m(panel);
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+
+ mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
+ mipi_dsi_msleep(&dsi_ctx, 100);
+
+ ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_disable(ctx->vci);
+ regulator_disable(ctx->vddio);
+
+ return dsi_ctx.accum_err;
+}
+
+/*
+ * TODO: These porch values are unused for command-mode panels, but currently
+ * used to artificially bump the clocks to account for transfer overhead.
+ */
+static const struct drm_display_mode samsung_sofef03_m_60hz_mode = {
+ .clock = (1080 + 156 + 8 + 8) * (2520 + 2393 + 8 + 8) * 60 / 1000,
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 156,
+ .hsync_end = 1080 + 156 + 8,
+ .htotal = 1080 + 156 + 8 + 8,
+ .vdisplay = 2520,
+ .vsync_start = 2520 + 2393,
+ .vsync_end = 2520 + 2393 + 8,
+ .vtotal = 2520 + 2393 + 8 + 8,
+ .width_mm = 61,
+ .height_mm = 142,
+ .type = DRM_MODE_TYPE_DRIVER,
+};
+
+static const struct drm_display_mode samsung_sofef03_m_120hz_mode = {
+ .clock = (1080 + 56 + 8 + 8) * (2520 + 499 + 8 + 8) * 120 / 1000,
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 56,
+ .hsync_end = 1080 + 56 + 8,
+ .htotal = 1080 + 56 + 8 + 8,
+ .vdisplay = 2520,
+ .vsync_start = 2520 + 499,
+ .vsync_end = 2520 + 499 + 8,
+ .vtotal = 2520 + 499 + 8 + 8,
+ .width_mm = 61,
+ .height_mm = 142,
+ .type = DRM_MODE_TYPE_DRIVER,
+};
+
+static int samsung_sofef03_m_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ if (enable_120hz)
+ return drm_connector_helper_get_modes_fixed(
+ connector, &samsung_sofef03_m_120hz_mode);
+ else
+ return drm_connector_helper_get_modes_fixed(
+ connector, &samsung_sofef03_m_60hz_mode);
+}
+
+static const struct drm_panel_funcs samsung_sofef03_m_panel_funcs = {
+ .prepare = samsung_sofef03_m_prepare,
+ .enable = samsung_sofef03_m_enable,
+ .disable = samsung_sofef03_m_disable,
+ .unprepare = samsung_sofef03_m_unprepare,
+ .get_modes = samsung_sofef03_m_get_modes,
+};
+
+static int samsung_sofef03_m_bl_update_status(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ u16 brightness = backlight_get_brightness(bl);
+
+ /* HACK: Setting anything below 0x100 makes the panel go black */
+ if (brightness != 0 && brightness < 256)
+ brightness = 256;
+
+ return mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+}
+
+static const struct backlight_ops samsung_sofef03_m_bl_ops = {
+ .update_status = samsung_sofef03_m_bl_update_status,
+};
+
+static int samsung_sofef03_m_probe(struct mipi_dsi_device *dsi)
+{
+ const struct backlight_properties props = {
+ .type = BACKLIGHT_RAW,
+ .brightness = 256,
+ .max_brightness = 1023,
+ };
+ struct device *dev = &dsi->dev;
+ struct samsung_sofef03_m *ctx;
+ int ret;
+
+ ctx = devm_drm_panel_alloc(dev, struct samsung_sofef03_m, panel,
+ &samsung_sofef03_m_panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ctx->vddio = devm_regulator_get(dev, "vddio");
+ if (IS_ERR(ctx->vddio))
+ return dev_err_probe(dev, PTR_ERR(ctx->vddio),
+ "Failed to get vddio regulator\n");
+
+ ctx->vci = devm_regulator_get(dev, "vci");
+ if (IS_ERR(ctx->vci))
+ return dev_err_probe(dev, PTR_ERR(ctx->vci),
+ "Failed to get vci regulator\n");
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+ "Failed to get reset-gpios\n");
+
+ ctx->dsi = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+ ctx->panel.prepare_prev_first = true;
+
+ ctx->panel.backlight = devm_backlight_device_register(
+ dev, dev_name(dev), dev, dsi,
+ &samsung_sofef03_m_bl_ops,
+ &props);
+ if (IS_ERR(ctx->panel.backlight))
+ return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+ "Failed to create backlight\n");
+
+ drm_panel_add(&ctx->panel);
+
+ /* This panel only supports DSC; unconditionally enable it */
+ dsi->dsc = &ctx->dsc;
+
+ ctx->dsc.dsc_version_major = 1;
+ ctx->dsc.dsc_version_minor = 1;
+
+ ctx->dsc.slice_height = 30;
+ ctx->dsc.slice_width = 540;
+ ctx->dsc.slice_count = 2;
+ ctx->dsc.bits_per_component = 8;
+ ctx->dsc.bits_per_pixel = 8 << 4; /* 4 fractional bits */
+ ctx->dsc.block_pred_enable = true;
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void samsung_sofef03_m_remove(struct mipi_dsi_device *dsi)
+{
+ struct samsung_sofef03_m *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+ drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id samsung_sofef03_m_of_match[] = {
+ /* Sony Xperia 5 II */
+ { .compatible = "samsung,sofef03-m-amb609vp01" },
+ /* Sony Xperia 5 III */
+ { .compatible = "samsung,sofef03-m-amb609vp04" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, samsung_sofef03_m_of_match);
+
+static struct mipi_dsi_driver samsung_sofef03_m_driver = {
+ .probe = samsung_sofef03_m_probe,
+ .remove = samsung_sofef03_m_remove,
+ .driver = {
+ .name = "panel-samsung-sofef03-m",
+ .of_match_table = samsung_sofef03_m_of_match,
+ },
+};
+module_mipi_dsi_driver(samsung_sofef03_m_driver);
+
+MODULE_AUTHOR("Konrad Dybcio <konrad.dybcio@linaro.org>");
+MODULE_AUTHOR("Marijn Suijten <marijn.suijten@somainline.org>");
+MODULE_DESCRIPTION("DRM panel driver for Samsung SOFEF03-M Display-Driver-IC panels");
+MODULE_LICENSE("GPL");
--
2.52.0On 2025-12-22 00:32:13, Marijn Suijten wrote:
...
> +static int samsung_sofef03_m_probe(struct mipi_dsi_device *dsi)
> +{
...
> + ctx->vddio = devm_regulator_get(dev, "vddio");
> + if (IS_ERR(ctx->vddio))
> + return dev_err_probe(dev, PTR_ERR(ctx->vddio),
> + "Failed to get vddio regulator\n");
> +
> + ctx->vci = devm_regulator_get(dev, "vci");
> + if (IS_ERR(ctx->vci))
> + return dev_err_probe(dev, PTR_ERR(ctx->vci),
> + "Failed to get vci regulator\n");
> +
In case someone wonders why this is inconsistently *NOT* using regulator_bulk
while the other patches are; this was a last-minute clean-up whose fixup! commit
I seem to have lost in a separate branch. This will be incorporated in v3
together with the whitespace fix in the comment.
- Marijn
On Mon, Dec 22, 2025 at 12:32:13AM +0100, Marijn Suijten wrote: > The SOFEF03-M Display-Driver-IC is paired with a amb609vp01 panel on > the Sony Xperia 5 II and amb609vp04 panel on the Sony Xperia 5 III. It > requires Display Stream Compression 1.1 which allows the panels to run > at 120Hz, even though a 60Hz mode is available too. > > Downstream porch values are retained; despite not being used in > command-mode they are useful to artificially bump the clock values to > account for "transfer overhead" while that calculation is still missing > from the MSM DSI host driver. > > Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org> > Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > MAINTAINERS | 1 + > drivers/gpu/drm/panel/Kconfig | 16 ++ > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-samsung-sofef03.c | 373 ++++++++++++++++++++++++++ > 4 files changed, 391 insertions(+) > > + * Based on the following Sony downstream DTS command sequences: > + * - Xperia 5 II (edo pdx206): https://github.com/sonyxperiadev/kernel-copyleft-dts/blob/58.2.A.10.xxx/somc/dsi-panel-sofef03_m-fhd_plus.dtsi > + * - Xperia 5 III (sagami pdx214): https://github.com/sonyxperiadev/kernel-copyleft-dts/blob/61.2.A.0.xxx/somc/dsi-panel-sofef03_m-amb609vp01-fhd_plus.dtsi Nit: please align. > + */ > + With that fixed: Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> -- With best wishes Dmitry
© 2016 - 2026 Red Hat, Inc.