[PATCH 00/13] spi: cadence-qspi: Add Renesas RZ/N1 support

Miquel Raynal (Schneider Electric) posted 13 patches 1 month, 3 weeks ago
There is a newer version of this series
.../devicetree/bindings/spi/cdns,qspi-nor.yaml     |   4 +
arch/arm/boot/dts/renesas/r9a06g032.dtsi           |  14 ++
drivers/spi/spi-cadence-quadspi.c                  | 256 ++++++++++-----------
3 files changed, 145 insertions(+), 129 deletions(-)
[PATCH 00/13] spi: cadence-qspi: Add Renesas RZ/N1 support
Posted by Miquel Raynal (Schneider Electric) 1 month, 3 weeks ago
Hello,

This series adds support for the QSPI controller available on Renesas
RZ/N1S and RZ/N1D SoC. It has been tested with a custom board (see last
SPI patch for details).

Adding support for this SoC required a few adaptations in the Cadence
QSPI driver. The bulk of the work is in the few last patches. Everything
else is just misc style fixes and improvements which bothered me while I
was wandering.

In order to support all constraints, I sometimes used a new quirk (for
the write protection feature and the "no indirect mode"), and sometimes
used the compatible directly. The ones I thought might not be RZ/N1
specific have been implemented under the form of a quirk, in order to
ease their reuse. The other adaptations, which I believe are more
Renesas specific, have been handled using the compatible. This is all
very arbitrary, and can be discussed.

Thanks,
Miquèl

Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
---
Miquel Raynal (1):
      spi: cadence-qspi: Make sure we filter out unsupported ops

Miquel Raynal (Schneider Electric) (12):
      spi: dt-bindings: cdns,qspi-nor: Add Renesas RZ/N1D400 to the list
      spi: cadence-qspi: Align definitions
      spi: cadence-qspi: Fix style and improve readability
      spi: cadence-qspi: Fix ORing style and alignments
      spi: cadence-qspi: Remove an useless operation
      spi: cadence-qspi: Fix probe error path and remove
      spi: cadence-qspi: Try hard to disable the clocks
      spi: cadence-qspi: Kill cqspi_jh7110_clk_init
      spi: cadence-qspi: Add a flag for controllers without indirect access support
      spi: cadence-qspi: Make sure write protection is disabled
      spi: cadence-qspi: Add support for the Renesas RZ/N1 controller
      ARM: dts: r9a06g032: Describe the QSPI controller

 .../devicetree/bindings/spi/cdns,qspi-nor.yaml     |   4 +
 arch/arm/boot/dts/renesas/r9a06g032.dtsi           |  14 ++
 drivers/spi/spi-cadence-quadspi.c                  | 256 ++++++++++-----------
 3 files changed, 145 insertions(+), 129 deletions(-)
---
base-commit: c83903530c78c9ae49235ac135d43bf188762169
change-id: 20251219-schneider-6-19-rc1-qspi-7c3e1547af6d

Best regards,
-- 
Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>