From: Emil Svendsen <emas@bang-olufsen.dk>

Looking at section 8.6.1.1.69 in datasheets for both 5140 and 6140 (3140
doesn't support DRE). REG ADCX140_DSP_CFG1 BIT 3 field "DRE_AGC_SEL" it
select either DRE or AGC.
It states:
 * 0 = DRE
 * 1 = AGC

The control is called "DRE_ENABLE" and for it to be true it has to be
active low.

This commit will invert the control so "DRE_ENABLE" is active low.

Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 sound/soc/codecs/tlv320adcx140.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
index 443cf59cb71ab3e70f47c4395159752a0331b1ef..75e1007012a48a569586bc2896400e79ddce1c71 100644
--- a/sound/soc/codecs/tlv320adcx140.c
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -338,7 +338,7 @@ static const struct snd_kcontrol_new adcx140_dapm_ch4_dre_en_switch =
 	SOC_DAPM_SINGLE("Switch", ADCX140_CH4_CFG0, 0, 1, 0);
 
 static const struct snd_kcontrol_new adcx140_dapm_dre_en_switch =
-	SOC_DAPM_SINGLE("Switch", ADCX140_DSP_CFG1, 3, 1, 0);
+	SOC_DAPM_SINGLE("Switch", ADCX140_DSP_CFG1, 3, 1, 1);
 
 /* Output Mixer */
 static const struct snd_kcontrol_new adcx140_output_mixer_controls[] = {

-- 
2.47.3