drivers/gpu/drm/xe/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
From: Arnd Bergmann <arnd@arndb.de>
The Makefile logic for building xe_sriov_vfio.o was added incorrectly,
as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
built-in xe driver:
ERROR: modpost: "xe_sriov_vfio_stop_copy_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_stop_copy_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_suspend_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_wait_flr_done" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_migration_supported" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
WARNING: modpost: suppressed 3 unresolved symbol warnings because there were too many)
Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide whether to
include the the object instead.
Fixes: 17f22465c5a5 ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/gpu/drm/xe/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/xe/Makefile b/drivers/gpu/drm/xe/Makefile
index dfc2ded01455..e5f3c2ec9e9a 100644
--- a/drivers/gpu/drm/xe/Makefile
+++ b/drivers/gpu/drm/xe/Makefile
@@ -185,8 +185,8 @@ xe-$(CONFIG_PCI_IOV) += \
xe_sriov_pf_sysfs.o \
xe_tile_sriov_pf_debugfs.o
-ifeq ($(CONFIG_PCI_IOV),y)
- xe-$(CONFIG_XE_VFIO_PCI) += xe_sriov_vfio.o
+ifdef CONFIG_XE_VFIO_PCI
+ xe-$(CONFIG_PCI_IOV) += xe_sriov_vfio.o
endif
# include helpers for tests even when XE is built-in
--
2.39.5
On Thu, 2025-12-04 at 10:41 +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The Makefile logic for building xe_sriov_vfio.o was added
> incorrectly,
> as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
> built-in xe driver:
>
> ERROR: modpost: "xe_sriov_vfio_stop_copy_enter"
> [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_stop_copy_exit"
> [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_suspend_device"
> [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_wait_flr_done"
> [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-
> pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_resume_data_enter"
> [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_resume_device"
> [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_resume_data_exit"
> [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-
> vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_migration_supported"
> [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> WARNING: modpost: suppressed 3 unresolved symbol warnings because
> there were too many)
>
> Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide
> whether to
> include the the object instead.
s/the the/the/ found by CI.
Same question here, Do you want to resent or should I fix up when
commiting?
Thanks,
Thomas
>
> Fixes: 17f22465c5a5 ("drm/xe/pf: Export helpers for VFIO")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/gpu/drm/xe/Makefile | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/Makefile
> b/drivers/gpu/drm/xe/Makefile
> index dfc2ded01455..e5f3c2ec9e9a 100644
> --- a/drivers/gpu/drm/xe/Makefile
> +++ b/drivers/gpu/drm/xe/Makefile
> @@ -185,8 +185,8 @@ xe-$(CONFIG_PCI_IOV) += \
> xe_sriov_pf_sysfs.o \
> xe_tile_sriov_pf_debugfs.o
>
> -ifeq ($(CONFIG_PCI_IOV),y)
> - xe-$(CONFIG_XE_VFIO_PCI) += xe_sriov_vfio.o
> +ifdef CONFIG_XE_VFIO_PCI
> + xe-$(CONFIG_PCI_IOV) += xe_sriov_vfio.o
> endif
>
> # include helpers for tests even when XE is built-in
On Thu, Dec 4, 2025, at 13:19, Thomas Hellström wrote:
> On Thu, 2025-12-04 at 10:41 +0100, Arnd Bergmann wrote:
>>
>> Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide
>> whether to
>> include the the object instead.
>
> s/the the/the/ found by CI.
> Same question here, Do you want to resent or should I fix up when
> commiting?
>
I'd prefer if you can fix up both so I don't have to send it again.
Arnd
On Thu, 2025-12-04 at 14:43 +0100, Arnd Bergmann wrote: > On Thu, Dec 4, 2025, at 13:19, Thomas Hellström wrote: > > On Thu, 2025-12-04 at 10:41 +0100, Arnd Bergmann wrote: > > > > > > Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to > > > decide > > > whether to > > > include the the object instead. > > > > s/the the/the/ found by CI. > > Same question here, Do you want to resent or should I fix up when > > commiting? > > > > I'd prefer if you can fix up both so I don't have to send it again. > > Arnd OK, I will. Thanks, Thomas
On 12/4/2025 10:41 AM, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The Makefile logic for building xe_sriov_vfio.o was added incorrectly,
> as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
> built-in xe driver:
>
> ERROR: modpost: "xe_sriov_vfio_stop_copy_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_stop_copy_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_suspend_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_wait_flr_done" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_resume_data_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_resume_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_resume_data_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> ERROR: modpost: "xe_sriov_vfio_migration_supported" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
> WARNING: modpost: suppressed 3 unresolved symbol warnings because there were too many)
>
> Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide whether to
> include the the object instead.
>
> Fixes: 17f22465c5a5 ("drm/xe/pf: Export helpers for VFIO")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
> ---
> drivers/gpu/drm/xe/Makefile | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/Makefile b/drivers/gpu/drm/xe/Makefile
> index dfc2ded01455..e5f3c2ec9e9a 100644
> --- a/drivers/gpu/drm/xe/Makefile
> +++ b/drivers/gpu/drm/xe/Makefile
> @@ -185,8 +185,8 @@ xe-$(CONFIG_PCI_IOV) += \
> xe_sriov_pf_sysfs.o \
> xe_tile_sriov_pf_debugfs.o
>
> -ifeq ($(CONFIG_PCI_IOV),y)
> - xe-$(CONFIG_XE_VFIO_PCI) += xe_sriov_vfio.o
> +ifdef CONFIG_XE_VFIO_PCI
> + xe-$(CONFIG_PCI_IOV) += xe_sriov_vfio.o
> endif
>
> # include helpers for tests even when XE is built-in
© 2016 - 2025 Red Hat, Inc.