[v1] Add support for PHY link active-level configuration in RZN1 MIIC driver

[PATCH net-next 0/2] Add support for PHY link active-level configuration in RZN1 MIIC driver

Prabhakar posted 2 patches 2 months, 4 weeks ago

Diff against v2
Download series mbox

There is a newer version of this series

.../bindings/net/pcs/renesas,rzn1-miic.yaml   |   7 ++
drivers/net/pcs/pcs-rzn1-miic.c               | 108 +++++++++++++++++-
2 files changed, 113 insertions(+), 2 deletions(-)

Expand all Fold all

[PATCH net-next 0/2] Add support for PHY link active-level configuration in RZN1 MIIC driver

Posted by Prabhakar 2 months, 4 weeks ago

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Hi All,

This patch series introduces support for configuring the active level of
the PHY-link signals in the Renesas RZN1 MIIC driver. The first patch adds
a new device tree binding property `renesas,miic-phylink-active-low` to
specify whether the PHY-link signals are active low. The second patch
implements the logic in the driver to read this property and configure the
MIIC_PHYLINK register accordingly.

Cheers,
Prabhakar

Lad Prabhakar (2):
  dt-bindings: net: pcs: renesas,rzn1-miic: Add
    renesas,miic-phylink-active-low property
  net: pcs: rzn1-miic: Add support for PHY link active-level
    configuration

 .../bindings/net/pcs/renesas,rzn1-miic.yaml   |   7 ++
 drivers/net/pcs/pcs-rzn1-miic.c               | 108 +++++++++++++++++-
 2 files changed, 113 insertions(+), 2 deletions(-)

-- 
2.43.0