sound/soc/sof/imx/imx9.c | 36 ++++++++---------------------------- 1 file changed, 8 insertions(+), 28 deletions(-)
From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Linux supports NXP's LMM SCMI protocol so switch to using the appropriate
API. The SIPs were intended to act as placeholders until the support for
said protocol was upstreamed.
The underlying CPU protocol command from IMX_SIP_SRC_M_RESET_ADDR_SET is
replaced by a LMM protocol command with the same effect (i.e. setting the
boot address) since using the CPU protocol would require additional
permissions (which TF-A already had). Apart from this, the SIPs are
replaced by their equivalent Linux LMM commands.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
sound/soc/sof/imx/imx9.c | 36 ++++++++----------------------------
1 file changed, 8 insertions(+), 28 deletions(-)
diff --git a/sound/soc/sof/imx/imx9.c b/sound/soc/sof/imx/imx9.c
index 853155d5990a..e56e8a1c8022 100644
--- a/sound/soc/sof/imx/imx9.c
+++ b/sound/soc/sof/imx/imx9.c
@@ -3,19 +3,11 @@
* Copyright 2025 NXP
*/
-#include <linux/arm-smccc.h>
+#include <linux/firmware/imx/sm.h>
#include "imx-common.h"
-#define IMX_SIP_SRC 0xC2000005
-#define IMX_SIP_SRC_M_RESET_ADDR_SET 0x03
-
-#define IMX95_CPU_VEC_FLAGS_BOOT BIT(29)
-
-#define IMX_SIP_LMM 0xC200000F
-#define IMX_SIP_LMM_BOOT 0x0
-#define IMX_SIP_LMM_SHUTDOWN 0x1
-
+#define IMX95_M7_CPU_ID 0x1
#define IMX95_M7_LM_ID 0x1
static struct snd_soc_dai_driver imx95_dai[] = {
@@ -38,7 +30,6 @@ static int imx95_ops_init(struct snd_sof_dev *sdev)
static int imx95_chip_probe(struct snd_sof_dev *sdev)
{
- struct arm_smccc_res smc_res;
struct platform_device *pdev;
struct resource *res;
@@ -49,31 +40,20 @@ static int imx95_chip_probe(struct snd_sof_dev *sdev)
return dev_err_probe(sdev->dev, -ENODEV,
"failed to fetch SRAM region\n");
- /* set core boot reset address */
- arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M_RESET_ADDR_SET, res->start,
- IMX95_CPU_VEC_FLAGS_BOOT, 0, 0, 0, 0, &smc_res);
-
- return smc_res.a0;
+ return scmi_imx_lmm_reset_vector_set(IMX95_M7_LM_ID, IMX95_M7_CPU_ID,
+ 0, res->start);
}
static int imx95_core_kick(struct snd_sof_dev *sdev)
{
- struct arm_smccc_res smc_res;
-
- arm_smccc_smc(IMX_SIP_LMM, IMX_SIP_LMM_BOOT,
- IMX95_M7_LM_ID, 0, 0, 0, 0, 0, &smc_res);
-
- return smc_res.a0;
+ return scmi_imx_lmm_operation(IMX95_M7_LM_ID, SCMI_IMX_LMM_BOOT, 0);
}
static int imx95_core_shutdown(struct snd_sof_dev *sdev)
{
- struct arm_smccc_res smc_res;
-
- arm_smccc_smc(IMX_SIP_LMM, IMX_SIP_LMM_SHUTDOWN,
- IMX95_M7_LM_ID, 0, 0, 0, 0, 0, &smc_res);
-
- return smc_res.a0;
+ return scmi_imx_lmm_operation(IMX95_M7_LM_ID,
+ SCMI_IMX_LMM_SHUTDOWN,
+ SCMI_IMX_LMM_OP_FORCEFUL);
}
static const struct imx_chip_ops imx95_chip_ops = {
--
2.43.0
On 11/12/2025 4:41 PM, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>
> Linux supports NXP's LMM SCMI protocol so switch to using the appropriate
> API. The SIPs were intended to act as placeholders until the support for
> said protocol was upstreamed.
>
> The underlying CPU protocol command from IMX_SIP_SRC_M_RESET_ADDR_SET is
> replaced by a LMM protocol command with the same effect (i.e. setting the
> boot address) since using the CPU protocol would require additional
> permissions (which TF-A already had). Apart from this, the SIPs are
> replaced by their equivalent Linux LMM commands.
>
> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> ---
> sound/soc/sof/imx/imx9.c | 36 ++++++++----------------------------
> 1 file changed, 8 insertions(+), 28 deletions(-)
>
> diff --git a/sound/soc/sof/imx/imx9.c b/sound/soc/sof/imx/imx9.c
> index 853155d5990a..e56e8a1c8022 100644
> --- a/sound/soc/sof/imx/imx9.c
> +++ b/sound/soc/sof/imx/imx9.c
> @@ -3,19 +3,11 @@
> * Copyright 2025 NXP
> */
>
> -#include <linux/arm-smccc.h>
> +#include <linux/firmware/imx/sm.h>
>
> #include "imx-common.h"
>
> -#define IMX_SIP_SRC 0xC2000005
> -#define IMX_SIP_SRC_M_RESET_ADDR_SET 0x03
> -
> -#define IMX95_CPU_VEC_FLAGS_BOOT BIT(29)
> -
> -#define IMX_SIP_LMM 0xC200000F
> -#define IMX_SIP_LMM_BOOT 0x0
> -#define IMX_SIP_LMM_SHUTDOWN 0x1
> -
> +#define IMX95_M7_CPU_ID 0x1
> #define IMX95_M7_LM_ID 0x1
>
> static struct snd_soc_dai_driver imx95_dai[] = {
> @@ -38,7 +30,6 @@ static int imx95_ops_init(struct snd_sof_dev *sdev)
>
> static int imx95_chip_probe(struct snd_sof_dev *sdev)
> {
> - struct arm_smccc_res smc_res;
> struct platform_device *pdev;
> struct resource *res;
>
> @@ -49,31 +40,20 @@ static int imx95_chip_probe(struct snd_sof_dev *sdev)
> return dev_err_probe(sdev->dev, -ENODEV,
> "failed to fetch SRAM region\n");
>
> - /* set core boot reset address */
> - arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M_RESET_ADDR_SET, res->start,
> - IMX95_CPU_VEC_FLAGS_BOOT, 0, 0, 0, 0, &smc_res);
> -
> - return smc_res.a0;
> + return scmi_imx_lmm_reset_vector_set(IMX95_M7_LM_ID, IMX95_M7_CPU_ID,
> + 0, res->start);
Please add a dependency for SND_SOC_SOF_IMX9 on CONFIG_IMX_SCMI_LMM_DRV.
Without this, the functions scmi_imx_lmm_reset_vector_set and
scmi_imx_lmm_operation will return -EOPNOTSUPP.
Iulia
> }
>
> static int imx95_core_kick(struct snd_sof_dev *sdev)
> {
> - struct arm_smccc_res smc_res;
> -
> - arm_smccc_smc(IMX_SIP_LMM, IMX_SIP_LMM_BOOT,
> - IMX95_M7_LM_ID, 0, 0, 0, 0, 0, &smc_res);
> -
> - return smc_res.a0;
> + return scmi_imx_lmm_operation(IMX95_M7_LM_ID, SCMI_IMX_LMM_BOOT, 0);
> }
>
> static int imx95_core_shutdown(struct snd_sof_dev *sdev)
> {
> - struct arm_smccc_res smc_res;
> -
> - arm_smccc_smc(IMX_SIP_LMM, IMX_SIP_LMM_SHUTDOWN,
> - IMX95_M7_LM_ID, 0, 0, 0, 0, 0, &smc_res);
> -
> - return smc_res.a0;
> + return scmi_imx_lmm_operation(IMX95_M7_LM_ID,
> + SCMI_IMX_LMM_SHUTDOWN,
> + SCMI_IMX_LMM_OP_FORCEFUL);
> }
>
> static const struct imx_chip_ops imx95_chip_ops = {
© 2016 - 2026 Red Hat, Inc.