[v1] net: phy: microchip_t1s: Add support for LAN867x Rev.D0 PHY

[PATCH net-next 0/2] net: phy: microchip_t1s: Add support for LAN867x Rev.D0 PHY

Parthiban Veerasooran posted 2 patches 3 months, 1 week ago

Diff against v1
Download series mbox

There is a newer version of this series

drivers/net/phy/Kconfig         |  2 +-
drivers/net/phy/microchip_t1s.c | 96 ++++++++++++++++++++++++++++++++-
2 files changed, 96 insertions(+), 2 deletions(-)

Expand all Fold all

[PATCH net-next 0/2] net: phy: microchip_t1s: Add support for LAN867x Rev.D0 PHY

Posted by Parthiban Veerasooran 3 months, 1 week ago

This patch series adds support for the latest Microchip LAN8670/1/2 Rev.D0
10BASE-T1S PHYs to the microchip_t1s driver.

The new Rev.D0 silicon introduces updated initialization requirements and
link status handling behavior compared to earlier revisions (Rev.C2 and
below). These updates are necessary for full compliance with the OPEN
Alliance 10BASE-T1S specification and are documented in Microchip
Application Note AN1699 Revision G (DS60001699G – October 2025).

Summary of changes:
- Implements Rev.D0-specific configuration sequence as described in AN1699
  Rev.G.
- Introduces link status control configuration for LAN867x Rev.D0.

Parthiban Veerasooran (2):
  net: phy: microchip_t1s: add support for Microchip LAN867X Rev.D0 PHY
  net: phy: microchip_t1s: configure link status control for LAN867x
    Rev.D0

 drivers/net/phy/Kconfig         |  2 +-
 drivers/net/phy/microchip_t1s.c | 96 ++++++++++++++++++++++++++++++++-
 2 files changed, 96 insertions(+), 2 deletions(-)


base-commit: 1bae0fd90077875b6c9c853245189032cbf019f7
-- 
2.34.1