Add the compatibles and config for CCI on MSM8953, then enable these I2C
busses on Fairphone 3 and configure the EEPROM found with one of the
camera modules.

Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
---
Changes in v2:
- Fix wrong placement of msm8953-cci in if in cci binding
- Rebase on linux-next
- Pick up tags
- Link to v1: https://lore.kernel.org/r/20250810-msm8953-cci-v1-0-e83f104cabfc@lucaweiss.eu

---
Luca Weiss (7):
      dt-bindings: i2c: qcom-cci: Document msm8953 compatible
      i2c: qcom-cci: Add msm8953 compatible
      dt-bindings: eeprom: at24: Add compatible for Belling BL24S64
      arm64: dts: qcom: msm8953: Re-sort tlmm pinctrl states
      arm64: dts: qcom: msm8953: Add CCI nodes
      arm64: dts: qcom: sdm632-fairphone-fp3: Add camera fixed regulators
      arm64: dts: qcom: sdm632-fairphone-fp3: Enable CCI and add EEPROM

 Documentation/devicetree/bindings/eeprom/at24.yaml |   1 +
 .../devicetree/bindings/i2c/qcom,i2c-cci.yaml      |   2 +
 arch/arm64/boot/dts/qcom/msm8953.dtsi              | 668 +++++++++++----------
 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts  |  57 ++
 drivers/i2c/busses/i2c-qcom-cci.c                  |  46 ++
 5 files changed, 468 insertions(+), 306 deletions(-)
---
base-commit: 7c0022eca56891cbc3d94cee91733c28568342bb
change-id: 20250808-msm8953-cci-587596df83da

Best regards,
-- 
Luca Weiss <luca@lucaweiss.eu>

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>


On Tue, 28 Oct 2025 17:40:45 +0100, Luca Weiss wrote:
> Add the compatibles and config for CCI on MSM8953, then enable these I2C
> busses on Fairphone 3 and configure the EEPROM found with one of the
> camera modules.
> 
> 

Applied, thanks!

[3/7] dt-bindings: eeprom: at24: Add compatible for Belling BL24S64
      https://git.kernel.org/brgl/linux/c/aef72ebe9c86b516c6e126d4b453c96496547f0b

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

On Tue, 28 Oct 2025 17:40:45 +0100, Luca Weiss wrote:
> Add the compatibles and config for CCI on MSM8953, then enable these I2C
> busses on Fairphone 3 and configure the EEPROM found with one of the
> camera modules.
> 
> 

Applied, thanks!

[4/7] arm64: dts: qcom: msm8953: Re-sort tlmm pinctrl states
      commit: 589deb6bc2757787f2b15a84017c23839db3bf8e
[5/7] arm64: dts: qcom: msm8953: Add CCI nodes
      commit: 842c0aa3e04201bc13f51f5ce9edbb8100ef0d73
[6/7] arm64: dts: qcom: sdm632-fairphone-fp3: Add camera fixed regulators
      commit: 9e834e768d0b2e9007cd6a5c778d2d8e3674e78f
[7/7] arm64: dts: qcom: sdm632-fairphone-fp3: Enable CCI and add EEPROM
      commit: cfc22c2121cbf8bb75cb9a9993f13c17587ed55e

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>