1. Patchew
  2. linux
  3. [PATCH v2 0/3] Add display overlays for imx8mp-phyboard-pollux
  4. View patch

[PATCH v2 3/3] arm64: dts: imx8mp pollux: add displays for expansion board

Yannic Moog posted 3 patches 1 week ago
There is a newer version of this series
[PATCH v2 3/3] arm64: dts: imx8mp pollux: add displays for expansion board
Posted by Yannic Moog 1 week ago 
The same displays that can be connected directly to the
imx8mp-phyboard-pollux can also be connected to the expansion board
PEB-AV-10. For displays connected to the expansion board, a second LVDS
channel of the i.MX 8M Plus SoC is used and only a single display
connected to the SoC LVDS display bridge at a given time is supported.

Signed-off-by: Yannic Moog <y.moog@phytec.de>
---
 arch/arm64/boot/dts/freescale/Makefile             |  6 +++
 ...mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso | 45 ++++++++++++++++++++++
 ...8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso | 45 ++++++++++++++++++++++
 3 files changed, 96 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 9c121041128972d2239e2cc74df98b0bf7de1ac2..e4b097446440f41785dd1a0e5d354796e800ee76 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -222,11 +222,17 @@ imx8mp-phyboard-pollux-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
 	imx8mp-phyboard-pollux-etml1010g3dra.dtbo
 imx8mp-phyboard-pollux-peb-av-10-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
 	imx8mp-phyboard-pollux-peb-av-10.dtbo
+imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
+	imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtbo
+imx8mp-phyboard-pollux-peb-av-10-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
+	imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtbo
 imx8mp-phyboard-pollux-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
 	imx8mp-phyboard-pollux-ph128800t006.dtbo
 imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-etml1010g3dra.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-ph128800t006.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-eth.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-basic.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..d71945430c801a0136a95d691af0cec64622a066
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include "imx8mp-phyboard-pollux-peb-av-10.dtsi"
+
+&backlight_lvds0 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm4 0 50000 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <0>, <506800000>;
+	status = "okay";
+};
+
+&panel_lvds0 {
+	compatible = "edt,etml1010g3dra";
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..8ec4bbbbabb5cc7f5ae05d641fb5d14931250daf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include "imx8mp-phyboard-pollux-peb-av-10.dtsi"
+
+&backlight_lvds0 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm4 0 66667 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 66.5 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 66.5 * 7 = 465.5 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 66.5 MHz.
+	 */
+	assigned-clock-rates = <0>, <465500000>;
+	status = "okay";
+};
+
+&panel_lvds0 {
+	compatible = "powertip,ph128800t006-zhc01";
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};

-- 
2.51.0
Re: [PATCH v2 3/3] arm64: dts: imx8mp pollux: add displays for expansion board
Posted by Frank Li 1 week ago 
On Wed, Sep 24, 2025 at 01:59:06PM +0200, Yannic Moog wrote:
> The same displays that can be connected directly to the
> imx8mp-phyboard-pollux can also be connected to the expansion board
> PEB-AV-10. For displays connected to the expansion board, a second LVDS
> channel of the i.MX 8M Plus SoC is used and only a single display
> connected to the SoC LVDS display bridge at a given time is supported.
>
> Signed-off-by: Yannic Moog <y.moog@phytec.de>
> ---
>  arch/arm64/boot/dts/freescale/Makefile             |  6 +++
>  ...mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso | 45 ++++++++++++++++++++++
>  ...8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso | 45 ++++++++++++++++++++++

I think you squash this to previous patch, or move previous patch dtso into
this patch to show dtsi's usage.

Frank

>  3 files changed, 96 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 9c121041128972d2239e2cc74df98b0bf7de1ac2..e4b097446440f41785dd1a0e5d354796e800ee76 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -222,11 +222,17 @@ imx8mp-phyboard-pollux-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
>  	imx8mp-phyboard-pollux-etml1010g3dra.dtbo
>  imx8mp-phyboard-pollux-peb-av-10-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
>  	imx8mp-phyboard-pollux-peb-av-10.dtbo
> +imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
> +	imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtbo
> +imx8mp-phyboard-pollux-peb-av-10-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
> +	imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtbo
>  imx8mp-phyboard-pollux-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
>  	imx8mp-phyboard-pollux-ph128800t006.dtbo
>  imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-etml1010g3dra.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-ph128800t006.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-eth.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-basic.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso
> new file mode 100644
> index 0000000000000000000000000000000000000000..d71945430c801a0136a95d691af0cec64622a066
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso
> @@ -0,0 +1,45 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2025 PHYTEC Messtechnik GmbH
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/clock/imx8mp-clock.h>
> +#include "imx8mp-phyboard-pollux-peb-av-10.dtsi"
> +
> +&backlight_lvds0 {
> +	brightness-levels = <0 8 16 32 64 128 255>;
> +	default-brightness-level = <8>;
> +	enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
> +	num-interpolated-steps = <2>;
> +	pwms = <&pwm4 0 50000 0>;
> +	status = "okay";
> +};
> +
> +&lcdif2 {
> +	status = "okay";
> +};
> +
> +&lvds_bridge {
> +	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
> +	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
> +	/*
> +	 * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
> +	 * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout
> +	 * engine can reach accurate pixel clock of exactly 72.4 MHz.
> +	 */
> +	assigned-clock-rates = <0>, <506800000>;
> +	status = "okay";
> +};
> +
> +&panel_lvds0 {
> +	compatible = "edt,etml1010g3dra";
> +	status = "okay";
> +};
> +
> +&pwm4 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso
> new file mode 100644
> index 0000000000000000000000000000000000000000..8ec4bbbbabb5cc7f5ae05d641fb5d14931250daf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso
> @@ -0,0 +1,45 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2025 PHYTEC Messtechnik GmbH
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/clock/imx8mp-clock.h>
> +#include "imx8mp-phyboard-pollux-peb-av-10.dtsi"
> +
> +&backlight_lvds0 {
> +	brightness-levels = <0 8 16 32 64 128 255>;
> +	default-brightness-level = <8>;
> +	enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
> +	num-interpolated-steps = <2>;
> +	pwms = <&pwm4 0 66667 0>;
> +	status = "okay";
> +};
> +
> +&lcdif2 {
> +	status = "okay";
> +};
> +
> +&lvds_bridge {
> +	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
> +	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
> +	/*
> +	 * The LVDS panel uses 66.5 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
> +	 * 66.5 * 7 = 465.5 MHz so the LDB serializer and LCDIFv3 scanout
> +	 * engine can reach accurate pixel clock of exactly 66.5 MHz.
> +	 */
> +	assigned-clock-rates = <0>, <465500000>;
> +	status = "okay";
> +};
> +
> +&panel_lvds0 {
> +	compatible = "powertip,ph128800t006-zhc01";
> +	status = "okay";
> +};
> +
> +&pwm4 {
> +	status = "okay";
> +};
>
> --
> 2.51.0
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.