UART1 and UART3 go to a connector for use on a baseboard and as such are
defined in the baseboard device-trees. Remove them from the gw702x SOM
device-tree.
Fixes: 0d5b288c2110 ("arm64: dts: freescale: Add imx8mp-venice-gw7905-2x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
.../dts/freescale/imx8mp-venice-gw702x.dtsi | 28 -------------------
1 file changed, 28 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
index dd9eeb3479fd..dba35b3394bc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -396,13 +396,6 @@ &i2c3 {
status = "okay";
};
-/* off-board header */
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
/* console */
&uart2 {
pinctrl-names = "default";
@@ -410,13 +403,6 @@ &uart2 {
status = "okay";
};
-/* off-board header */
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- status = "okay";
-};
-
/* off-board */
&usdhc1 {
pinctrl-names = "default";
@@ -521,13 +507,6 @@ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c2
>;
};
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
- MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
- >;
- };
-
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
@@ -535,13 +514,6 @@ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
>;
};
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140
- MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140
- >;
- };
-
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
--
2.25.1