[PATCH v2 0/7] Initial Kontron SMARC-sAM67 support

Michael Walle posted 7 patches 2 weeks, 6 days ago
.../devicetree/bindings/arm/ti/k3.yaml        |    1 +
.../hwmon/kontron,sl28cpld-hwmon.yaml         |    1 +
.../devicetree/bindings/mfd/ti,tps6594.yaml   |    1 +
.../watchdog/kontron,sl28cpld-wdt.yaml        |    7 +-
Documentation/hwmon/sa67.rst                  |   41 +
MAINTAINERS                                   |    1 +
arch/arm64/boot/dts/ti/Makefile               |    6 +
.../dts/ti/k3-am67a-kontron-sa67-base.dts     | 1091 +++++++++++++++++
.../dts/ti/k3-am67a-kontron-sa67-gbe1.dtso    |   26 +
.../ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso  |   31 +
drivers/hwmon/Kconfig                         |   10 +
drivers/hwmon/Makefile                        |    1 +
drivers/hwmon/sa67mcu-hwmon.c                 |  161 +++
13 files changed, 1377 insertions(+), 1 deletion(-)
create mode 100644 Documentation/hwmon/sa67.rst
create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso
create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso
create mode 100644 drivers/hwmon/sa67mcu-hwmon.c
[PATCH v2 0/7] Initial Kontron SMARC-sAM67 support
Posted by Michael Walle 2 weeks, 6 days ago
Now that the PMIC support is there, we can finally, upstream the
support for this board. Besides the usual device tree, this
patchset contains the support for the on-board house keeping MCU. It
make extensive reuse of the drivers for the former SMARC-sAL28
board. Besides different hwmon sensors, all the dt binding patches
will just add a board specific compatible (in addition to the old
sl28 compatible) to make any future board specific quirks possible.

I'm aware that there is a patch [1] which moves the sl28cpld MFD
schema to a different directory. Once that patch is merged, I'll
repost this series. But I already want to get some early feedback.

v2:
 - dropped patches which were already picked up
 - new patch "dt-bindings: mfd: tps6594: allow gpio-line-names"
 - separate driver for the hwmon, add missing hwmon documentation,
   thanks Guenter
 - split the DT as suggested by the SoC maintainers
 - add missing copyright and license to the overlays, thanks Andrew

Michael Walle (7):
  dt-bindings: arm: ti: Add Kontron SMARC-sAM67 module
  dt-bindings: mfd: tps6594: allow gpio-line-names
  arm64: dts: ti: Add support for Kontron SMARC-sAM67
  dt-bindings: hwmon: sl28cpld: add sa67mcu compatible
  dt-bindings: watchdog: add SMARC-sAM67 support
  hwmon: add SMARC-sAM67 support
  arm64: dts: ti: sa67: add on-board management controller node

 .../devicetree/bindings/arm/ti/k3.yaml        |    1 +
 .../hwmon/kontron,sl28cpld-hwmon.yaml         |    1 +
 .../devicetree/bindings/mfd/ti,tps6594.yaml   |    1 +
 .../watchdog/kontron,sl28cpld-wdt.yaml        |    7 +-
 Documentation/hwmon/sa67.rst                  |   41 +
 MAINTAINERS                                   |    1 +
 arch/arm64/boot/dts/ti/Makefile               |    6 +
 .../dts/ti/k3-am67a-kontron-sa67-base.dts     | 1091 +++++++++++++++++
 .../dts/ti/k3-am67a-kontron-sa67-gbe1.dtso    |   26 +
 .../ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso  |   31 +
 drivers/hwmon/Kconfig                         |   10 +
 drivers/hwmon/Makefile                        |    1 +
 drivers/hwmon/sa67mcu-hwmon.c                 |  161 +++
 13 files changed, 1377 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/hwmon/sa67.rst
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso
 create mode 100644 drivers/hwmon/sa67mcu-hwmon.c

-- 
2.39.5