From: Rahul T R <r-ravikumar@ti.com>

TI's J721E SoC supports a DPI to DSI video signal conversion bridge on
it's platform bus. The IP is from Cadence, and it has a custom TI
wrapper around it to facilitate integration.

This IP takes the DPI video signals from DSS and alongwith the DPHY IP,
it transmits DSI video signals out of the SoC.

Add support for DSI bridge and the DPHY-TX.

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
---
Changelog v2 -> v3:
-Add dsi ports.
-Revert to phy lablels used in v1.

Link to v1- https://lore.kernel.org/all/20250822124622.1424473-1-h-shenoy@ti.com/
Link to v2- https://lore.kernel.org/all/20250904105915.3043773-1-h-shenoy@ti.com/
 
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 39 +++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index ab3666ff4297..78fde982aff0 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1887,6 +1887,45 @@ port@4 {
 		};
 	};
 
+	dphy2: phy@4480000 {
+		compatible = "ti,j721e-dphy";
+		reg = <0x00 0x04480000 0x00 0x1000>;
+		clocks = <&k3_clks 296 1>, <&k3_clks 296 3>;
+		clock-names = "psm", "pll_ref";
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 296 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 296 3>;
+		assigned-clock-parents = <&k3_clks 296 4>;
+		assigned-clock-rates = <19200000>;
+		status = "disabled";
+	};
+
+	dsi0: dsi@4800000 {
+		compatible = "ti,j721e-dsi";
+		reg = <0x00 0x04800000 0x00 0x100000>, <0x00 0x04710000 0x00 0x100>;
+		clocks = <&k3_clks 150 1>, <&k3_clks 150 5>;
+		clock-names = "dsi_p_clk", "dsi_sys_clk";
+		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&dphy2>;
+		phy-names = "dphy";
+		status = "disabled";
+
+		dsi0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	dss: dss@4a00000 {
 		compatible = "ti,j721e-dss";
 		reg =
-- 
2.34.1

Hi Harikrishna Shenoy,

On Fri, 05 Sep 2025 15:13:25 +0530, Harikrishna Shenoy wrote:
> TI's J721E SoC supports a DPI to DSI video signal conversion bridge on
> it's platform bus. The IP is from Cadence, and it has a custom TI
> wrapper around it to facilitate integration.
> 
> This IP takes the DPI video signals from DSS and alongwith the DPHY IP,
> it transmits DSI video signals out of the SoC.
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-j721e-main: Add DSI and DPHY-TX
      commit: 6fdcb1013f13f87cdebd94ab8aa2f8ea2c644a33

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource