[PATCH 0/4] Enable Remote GPIO over RPMSG on i.MX Platform

Shenwei Wang posted 4 patches 1 month, 2 weeks ago
There is a newer version of this series
.../bindings/remoteproc/fsl,imx-rproc.yaml    | 117 ++++
arch/arm64/boot/dts/freescale/imx8ulp.dtsi    |  27 +
drivers/gpio/Kconfig                          |  11 +
drivers/gpio/Makefile                         |   1 +
drivers/gpio/gpio-imx-rpmsg.c                 | 559 ++++++++++++++++++
drivers/remoteproc/imx_rproc.c                | 125 ++++
include/linux/imx_rpmsg.h                     |  55 ++
7 files changed, 895 insertions(+)
create mode 100644 drivers/gpio/gpio-imx-rpmsg.c
create mode 100644 include/linux/imx_rpmsg.h
[PATCH 0/4] Enable Remote GPIO over RPMSG on i.MX Platform
Posted by Shenwei Wang 1 month, 2 weeks ago
Support the remote devices on the remote processor via the RPMSG bus on
i.MX platform.

The expected DTS layout structure is following:

    cm33: remoteproc-cm33 {
             compatible = "fsl,imx8ulp-cm33";

             rpmsg {
                     rpmsg-io-channel {
                             gpio@0 {
                                     compatible = "fsl,imx-rpmsg-gpio";
                                     reg = <0>;
                             };

                             gpio@1 {
                                     compatible = "fsl,imx-rpmsg-gpio";
                                     reg = <1>;
                             };

                             ...
                     };

                     rpmsg-i2c-channel {
                             i2c@0 {
                                     compatible = "fsl,imx-rpmsg-i2c";
                                     reg = <0>;
                             };
                     };

                     ...
             };
     };


Shenwei Wang (4):
  dt-bindings: remoteproc: imx_rproc: Add "rpmsg" subnode support
  remoteproc: imx_rproc: Populate devices under "rpmsg" subnode
  gpio: imx-rpmsg: add imx-rpmsg GPIO driver
  arm64: dts: imx8ulp: Add rpmsg node under imx_rproc

 .../bindings/remoteproc/fsl,imx-rproc.yaml    | 117 ++++
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi    |  27 +
 drivers/gpio/Kconfig                          |  11 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-imx-rpmsg.c                 | 559 ++++++++++++++++++
 drivers/remoteproc/imx_rproc.c                | 125 ++++
 include/linux/imx_rpmsg.h                     |  55 ++
 7 files changed, 895 insertions(+)
 create mode 100644 drivers/gpio/gpio-imx-rpmsg.c
 create mode 100644 include/linux/imx_rpmsg.h

--
2.43.0
Re: [PATCH 0/4] Enable Remote GPIO over RPMSG on i.MX Platform
Posted by Mathieu Poirier 1 month, 2 weeks ago
Did you send me a patchset that doesn't clear checkpatch.pl?

On Mon, Aug 18, 2025 at 03:44:16PM -0500, Shenwei Wang wrote:
> Support the remote devices on the remote processor via the RPMSG bus on
> i.MX platform.
> 
> The expected DTS layout structure is following:
> 
>     cm33: remoteproc-cm33 {
>              compatible = "fsl,imx8ulp-cm33";
> 
>              rpmsg {
>                      rpmsg-io-channel {
>                              gpio@0 {
>                                      compatible = "fsl,imx-rpmsg-gpio";
>                                      reg = <0>;
>                              };
> 
>                              gpio@1 {
>                                      compatible = "fsl,imx-rpmsg-gpio";
>                                      reg = <1>;
>                              };
> 
>                              ...
>                      };
> 
>                      rpmsg-i2c-channel {
>                              i2c@0 {
>                                      compatible = "fsl,imx-rpmsg-i2c";
>                                      reg = <0>;
>                              };
>                      };
> 
>                      ...
>              };
>      };
> 
> 
> Shenwei Wang (4):
>   dt-bindings: remoteproc: imx_rproc: Add "rpmsg" subnode support
>   remoteproc: imx_rproc: Populate devices under "rpmsg" subnode
>   gpio: imx-rpmsg: add imx-rpmsg GPIO driver
>   arm64: dts: imx8ulp: Add rpmsg node under imx_rproc
> 
>  .../bindings/remoteproc/fsl,imx-rproc.yaml    | 117 ++++
>  arch/arm64/boot/dts/freescale/imx8ulp.dtsi    |  27 +
>  drivers/gpio/Kconfig                          |  11 +
>  drivers/gpio/Makefile                         |   1 +
>  drivers/gpio/gpio-imx-rpmsg.c                 | 559 ++++++++++++++++++
>  drivers/remoteproc/imx_rproc.c                | 125 ++++
>  include/linux/imx_rpmsg.h                     |  55 ++
>  7 files changed, 895 insertions(+)
>  create mode 100644 drivers/gpio/gpio-imx-rpmsg.c
>  create mode 100644 include/linux/imx_rpmsg.h
> 
> --
> 2.43.0
>