At the moment, we indirectly rely on the boot firmware to set up the
pinctrl for the eDP HPD line coming from the internal display. If the boot
firmware does not configure the display (e.g. because a different display
is selected for output in the UEFI settings), then the display fails to
come up and there are several errors in the kernel log:

 [drm:dpu_encoder_phys_vid_wait_for_commit_done:544] [dpu error]vblank timeout: 80020041
 [drm:dpu_kms_wait_for_commit_done:524] [dpu error]wait for commit done returned -110
 [drm:dpu_encoder_frame_done_timeout:2715] [dpu error]enc40 frame done timeout
 ...

Fix this by adding the missing pinctrl for gpio119 (func1/edp0_hot and
bias-disable according to the ACPI DSDT).

Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 9369b76c668b5c008fefd85d5ca18e87ab9ce93f..c7f9f0dfdfac187ea88b1b207a882eaaeabe749a 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -915,6 +915,9 @@ &mdss_dp2_out {
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -1179,6 +1182,12 @@ &tlmm {
 			       <44 4>, /* SPI (TPM) */
 			       <238 1>; /* UFS Reset */
 
+	edp_hpd_default: edp-hpd-default-state {
+		pins = "gpio119";
+		function = "edp0_hot";
+		bias-disable;
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio70";
 		function = "gpio";

-- 
2.50.1