[PATCH v3 0/3] Add Radxa CM5 module and IO board dts

Joseph Kogut posted 3 patches 6 months, 3 weeks ago
There is a newer version of this series
.../devicetree/bindings/arm/rockchip.yaml     |   7 +
arch/arm64/boot/dts/rockchip/Makefile         |   1 +
.../dts/rockchip/rk3588s-radxa-cm5-io.dts     | 454 ++++++++++++++++++
.../boot/dts/rockchip/rk3588s-radxa-cm5.dtsi  | 156 ++++++
4 files changed, 618 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
[PATCH v3 0/3] Add Radxa CM5 module and IO board dts
Posted by Joseph Kogut 6 months, 3 weeks ago
This patch series adds initial device tree support for the Radxa CM5 SoM
and accompanying IO board.

V2 -> V3:
  - Addressed YAML syntax error in dt binding (per Rob)
  - Fixed whitespace issue in dts reported by checkpatch.pl
  - Split base SoM and carrier board into separate patches
  - Added further details about the SoM and carrier to the commit
    messages

V1 -> V2:
  - Added copyright header and data sheet links
  - Removed non-existent property
  - Sorted alphabetically
  - Removed errant whitespace
  - Moved status to the end of each node
  - Removed pinctrl-names property from leds (indicated by CHECK_DTBS)
  - Removed delays from gmac with internal delay

Joseph Kogut (3):
  dt-bindings: arm: rockchip: Add Radxa CM5 IO board
  arm64: dts: rockchip: Add rk3588 based Radxa CM5
  arm64: dts: rockchip: Add support for CM5 IO carrier

 .../devicetree/bindings/arm/rockchip.yaml     |   7 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3588s-radxa-cm5-io.dts     | 454 ++++++++++++++++++
 .../boot/dts/rockchip/rk3588s-radxa-cm5.dtsi  | 156 ++++++
 4 files changed, 618 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi

-- 
2.49.0