RGMII ports on BCM63xx were not really working, especially with PHYs
that support EEE and are capable of configuring their own RGMII delays.

So let's make them work.

With a BCM96328BU-P300:

Before:

[    3.580000] b53-switch 10700000.switch GbE3 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL
[    3.600000] b53-switch 10700000.switch GbE3 (uninitialized): failed to connect to PHY: -EINVAL
[    3.610000] b53-switch 10700000.switch GbE3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4
[    3.620000] b53-switch 10700000.switch GbE1 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL
[    3.640000] b53-switch 10700000.switch GbE1 (uninitialized): failed to connect to PHY: -EINVAL
[    3.650000] b53-switch 10700000.switch GbE1 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 5
[    3.660000] b53-switch 10700000.switch GbE4 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL
[    3.680000] b53-switch 10700000.switch GbE4 (uninitialized): failed to connect to PHY: -EINVAL
[    3.690000] b53-switch 10700000.switch GbE4 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 6
[    3.700000] b53-switch 10700000.switch GbE5 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL
[    3.720000] b53-switch 10700000.switch GbE5 (uninitialized): failed to connect to PHY: -EINVAL
[    3.730000] b53-switch 10700000.switch GbE5 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 7

After:

[    3.700000] b53-switch 10700000.switch GbE3 (uninitialized): PHY [mdio_mux-0.1:00] driver [Broadcom BCM54612E] (irq=POLL)
[    3.770000] b53-switch 10700000.switch GbE1 (uninitialized): PHY [mdio_mux-0.1:01] driver [Broadcom BCM54612E] (irq=POLL)
[    3.850000] b53-switch 10700000.switch GbE4 (uninitialized): PHY [mdio_mux-0.1:18] driver [Broadcom BCM54612E] (irq=POLL)
[    3.920000] b53-switch 10700000.switch GbE5 (uninitialized): PHY [mdio_mux-0.1:19] driver [Broadcom BCM54612E] (irq=POLL)

Jonas Gorski (3):
  net: dsa: b53: do not enable EEE on bcm63xx
  net: dsa: b53: fix configuring RGMII delay on bcm63xx
  net: dsa: b53: allow RGMII for bcm63xx RGMII ports

 drivers/net/dsa/b53/b53_common.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

-- 
2.43.0