On Fri, 16 May 2025 11:26:20 +0300
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:
> The AD4080 is a high-speed, low noise, low distortion, 20-bit, Easy
> Drive, successive approximation register (SAR) analog-to-digital
> converter (ADC). Maintaining high performance (signal-to-noise and
> distortion (SINAD) ratio > 90 dBFS) at signal frequencies in excess
> of 1 MHz enables the AD4080 to service a wide variety of precision,
> wide bandwidth data acquisition applications.
>
> This driver aims to be extended in the future to support multiple parts that are
> not released yet:
> AD4081
> AD4082
> AD4083
> AD4084
> AD4085
> AD4086
> AD4087
> AD4088
>
Applied with various tweaks as called out in the individual patch reviews
Note that this is queued up for 6.17 now as we are almost certainly too
close to the merge window (and hence not enough time in linux-next).
If the 6.15 release is delayed I might do another pull request. If not
this will be on the togreg branch after I rebase on rc1. Until then pushed
out only as testing.
Thanks,
Jonathan
> Antoniu Miclaus (10):
> iio: backend: add support for filter config
> iio: backend: add support for data alignment
> iio: backend: add support for number of lanes
> dt-bindings: iio: adc: add ad408x axi variant
> iio: adc: adi-axi-adc: add filter type config
> iio: adc: adi-axi-adc: add data align process
> iio: adc: adi-axi-adc: add num lanes support
> dt-bindings: iio: adc: add ad4080
> iio: adc: ad4080: add driver support
> Documetation: ABI: add sinc1 and sinc5+pf1 filter
>
> Documentation/ABI/testing/sysfs-bus-iio | 4 +
> .../bindings/iio/adc/adi,ad4080.yaml | 96 +++
> .../bindings/iio/adc/adi,axi-adc.yaml | 2 +
> MAINTAINERS | 8 +
> drivers/iio/adc/Kconfig | 14 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/ad4080.c | 620 ++++++++++++++++++
> drivers/iio/adc/adi-axi-adc.c | 77 +++
> drivers/iio/industrialio-backend.c | 58 ++
> include/linux/iio/backend.h | 19 +
> 10 files changed, 899 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
> create mode 100644 drivers/iio/adc/ad4080.c
>