[PATCH 0/3] usb-phy support for the old rk3036 soc

Heiko Stuebner posted 3 patches 9 months, 1 week ago
.../bindings/phy/rockchip,inno-usb2phy.yaml   |  2 ++
arch/arm/boot/dts/rockchip/rk3036-kylin.dts   | 12 +++++++
arch/arm/boot/dts/rockchip/rk3036.dtsi        | 35 +++++++++++++++++++
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 32 +++++++++++++++++
4 files changed, 81 insertions(+)
[PATCH 0/3] usb-phy support for the old rk3036 soc
Posted by Heiko Stuebner 9 months, 1 week ago
While trying to resurrect the rk3036 board in my boardfarm, I also
implemented the up to now missing usb2phy support.

The implementation is quite similar to the rk3128, except the not-
supported charger-detection, so its addition was quite simple.


Heiko Stuebner (3):
  dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
  phy: rockchip: inno-usb2: add phy definition for rk3036
  ARM: dts: rockchip: add rk3036 usb2phy nodes and enable them on kylin

 .../bindings/phy/rockchip,inno-usb2phy.yaml   |  2 ++
 arch/arm/boot/dts/rockchip/rk3036-kylin.dts   | 12 +++++++
 arch/arm/boot/dts/rockchip/rk3036.dtsi        | 35 +++++++++++++++++++
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 32 +++++++++++++++++
 4 files changed, 81 insertions(+)

-- 
2.47.2
Re: (subset) [PATCH 0/3] usb-phy support for the old rk3036 soc
Posted by Heiko Stuebner 8 months, 3 weeks ago
On Sat, 03 May 2025 22:15:09 +0200, Heiko Stuebner wrote:
> While trying to resurrect the rk3036 board in my boardfarm, I also
> implemented the up to now missing usb2phy support.
> 
> The implementation is quite similar to the rk3128, except the not-
> supported charger-detection, so its addition was quite simple.
> 
> 
> [...]

Applied, thanks!

[3/3] ARM: dts: rockchip: add rk3036 usb2phy nodes and enable them on kylin
      commit: 9e010737dd434e3eee1fa75938abea0dc2fab8e2

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>
Re: (subset) [PATCH 0/3] usb-phy support for the old rk3036 soc
Posted by Vinod Koul 8 months, 4 weeks ago
On Sat, 03 May 2025 22:15:09 +0200, Heiko Stuebner wrote:
> While trying to resurrect the rk3036 board in my boardfarm, I also
> implemented the up to now missing usb2phy support.
> 
> The implementation is quite similar to the rk3128, except the not-
> supported charger-detection, so its addition was quite simple.
> 
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
      commit: d78b565371314e48242cb9383d0f9d331119ab2e
[2/3] phy: rockchip: inno-usb2: add phy definition for rk3036
      commit: 3ca48b955bb34a3b07dd915318d73a23740de282

Best regards,
-- 
~Vinod