The AD4080 is a high-speed, low noise, low distortion, 20-bit, Easy
Drive, successive approximation register (SAR) analog-to-digital
converter (ADC). Maintaining high performance (signal-to-noise and
distortion (SINAD) ratio > 90 dBFS) at signal frequencies in excess
of 1 MHz enables the AD4080 to service a wide variety of precision,
wide bandwidth data acquisition applications.

This driver aims to be extended in the future to support multiple parts that are
not released yet:
    AD4081
    AD4082
    AD4083
    AD4084
    AD4085
    AD4086
    AD4087
    AD4088

Antoniu Miclaus (10):
  iio: backend: add support for filter config
  iio: backend: add support for data alignment
  iio: backend: add support for number of lanes
  dt-bindings: iio: adc: add ad408x axi variant
  iio: adc: adi-axi-adc: add filter type config
  iio: adc: adi-axi-adc: add data align process
  iio: adc: adi-axi-adc: add num lanes support
  dt-bindings: iio: adc: add ad4080
  iio: adc: ad4080: add driver support
  Documetation: ABI: add sinc1 and sinc5+pf1 filter

 Documentation/ABI/testing/sysfs-bus-iio       |   3 +
 .../bindings/iio/adc/adi,ad4080.yaml          |  96 +++
 .../bindings/iio/adc/adi,axi-adc.yaml         |   2 +
 MAINTAINERS                                   |   8 +
 drivers/iio/adc/Kconfig                       |  14 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ad4080.c                      | 569 ++++++++++++++++++
 drivers/iio/adc/adi-axi-adc.c                 |  90 +++
 drivers/iio/industrialio-backend.c            |  49 ++
 include/linux/iio/backend.h                   |  19 +
 10 files changed, 851 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
 create mode 100644 drivers/iio/adc/ad4080.c

-- 
2.49.0