From: Heiko Stuebner <heiko.stuebner@cherry.de>
The Display Serial Interface 2 (DSI-2) is part of a group of communication
protocols defined by the MIPI Alliance. The RK3588 implements this
specification in its two MIPI DSI-2 Host Controllers that are based on a
new Synopsys IP.
Tested-by: Dmitry Yashin <dmt.yashin@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
.../rockchip/rockchip,rk3588-mipi-dsi2.yaml | 120 ++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml
new file mode 100644
index 000000000000..53384e47b507
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI2
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3588-mipi-dsi2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: sys
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ This SoC uses GRF regs to switch between vopl/vopb.
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: dcphy
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: apb
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input node to receive pixel data.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI output node to panel.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - rockchip,grf
+ - phys
+ - phy-names
+ - ports
+ - reg
+
+allOf:
+ - $ref: /schemas/display/dsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/power/rk3588-power.h>
+ #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ dsi@fde20000 {
+ compatible = "rockchip,rk3588-mipi-dsi2";
+ reg = <0x0 0xfde20000 0x0 0x10000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+ clock-names = "pclk", "sys";
+ resets = <&cru SRST_P_DSIHOST0>;
+ reset-names = "apb";
+ power-domains = <&power RK3588_PD_VOP>;
+ phys = <&mipidcphy0 PHY_TYPE_DPHY>;
+ phy-names = "dcphy";
+ rockchip,grf = <&vop_grf>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dsi0_in: port@0 {
+ reg = <0>;
+ };
+
+ dsi0_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+ };
--
2.45.2