From: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Add dedicated schema for the PCIe controllers found on QCS615.
Due to qcs615's clock-names do not match any of the existing
dt-bindings, a new compatible for qcs615 is needed.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
.../bindings/pci/qcom,pcie-qcs615.yaml | 161 ++++++++++++++++++
1 file changed, 161 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml
new file mode 100644
index 000000000000..8f7571538d23
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-qcs615.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS615 PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm QCS615 SoC (and compatible) PCIe root complex controller is based on
+ the Synopsys DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-qcs615
+
+ reg:
+ minItems: 6
+ maxItems: 6
+
+ reg-names:
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 6
+ maxItems: 6
+
+ clock-names:
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ref # REFERENCE clock
+
+ interrupts:
+ minItems: 9
+ maxItems: 9
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+ - const: global
+
+ resets:
+ minItems: 1
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,qcs615-gcc.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c08000 {
+ compatible = "qcom,pcie-qcs615";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>,
+ <0 0x01c0b000 0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x3d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ref";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7", "global";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ interconnects = <&agree1_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ iommu-map = <0x0 &apps_smmu 0x400 0x1>,
+ <0x100 &apps_smmu 0x401 0x1>;
+
+ phys = <&pcie_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-0 = <&pcie_default_state>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.34.1
On Fri, Nov 22, 2024 at 10:33:11AM +0800, Ziyue Zhang wrote: > From: Krishna chaitanya chundru <quic_krichai@quicinc.com> > > Add dedicated schema for the PCIe controllers found on QCS615. > Due to qcs615's clock-names do not match any of the existing > dt-bindings, a new compatible for qcs615 is needed. > > Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> > Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com> > --- > .../bindings/pci/qcom,pcie-qcs615.yaml | 161 ++++++++++++++++++ > 1 file changed, 161 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml > new file mode 100644 > index 000000000000..8f7571538d23 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml > @@ -0,0 +1,161 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/qcom,pcie-qcs615.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm QCS615 PCI Express Root Complex > + > +maintainers: > + - Bjorn Andersson <andersson@kernel.org> > + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > + > +description: > + Qualcomm QCS615 SoC (and compatible) PCIe root complex controller is based on > + the Synopsys DesignWare PCIe IP. > + > +properties: > + compatible: > + const: qcom,pcie-qcs615 I thought that this should break qcom-soc.yaml. > + > + reg: > + minItems: 6 > + maxItems: 6 > + -- With best wishes Dmitry
On Fri, Nov 22, 2024 at 10:33:11AM +0800, Ziyue Zhang wrote: > From: Krishna chaitanya chundru <quic_krichai@quicinc.com> > > Add dedicated schema for the PCIe controllers found on QCS615. > Due to qcs615's clock-names do not match any of the existing > dt-bindings, a new compatible for qcs615 is needed. > > Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> > Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com> > --- > .../bindings/pci/qcom,pcie-qcs615.yaml | 161 ++++++++++++++++++ > 1 file changed, 161 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml I propose qcom,qcs615-pcie > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml > new file mode 100644 > index 000000000000..8f7571538d23 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-qcs615.yaml > @@ -0,0 +1,161 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/qcom,pcie-qcs615.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm QCS615 PCI Express Root Complex > + > +maintainers: > + - Bjorn Andersson <andersson@kernel.org> > + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > + > +description: > + Qualcomm QCS615 SoC (and compatible) PCIe root complex controller is based on > + the Synopsys DesignWare PCIe IP. > + > +properties: > + compatible: > + const: qcom,pcie-qcs615 I propose qcom,qcs615-pcie > + > + reg: > + minItems: 6 > + maxItems: 6 > + > + ... > + resets: > + minItems: 1 Use existing code as template, e.g. sm8550, instead of coming with own stuff. Drop. > + maxItems: 1 This fails tests. Best regards, Krzysztof
© 2016 - 2024 Red Hat, Inc.