[v1] QPIC v2 fixes for SDX75

[PATCH 2/2] mtd: rawnand: qcom: Fix onfi param page read

Posted by Md Sadre Alam 4 days, 6 hours ago

For QPIC V2 onwards there is a separate register to read
last code word "QPIC_NAND_READ_LOCATION_LAST_CW_n".

qcom_param_page_type_exec() is used to read only one code word
If we will configure number of code words to 1 in QPIC_NAND_DEV0_CFG0
register then QPIC controller thinks its reading the last code word,
since we are having separate register to read the last code word,
we have to configure "QPIC_NAND_READ_LOCATION_LAST_CW_n" register
to fetch data from QPIC buffer to system memory.

Also there is minimum size to fetch the data from device to QPIC buffer
is 512-bytes. If size is less than 512-bytes the data will not be
protected by ECC as per QPIC standard. So while reading onfi parameter
page from NAND device setting nandc->buf_count = 512.

Fixes: 89550beb098e ("mtd: rawnand: qcom: Implement exec_op()")
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 34ee8555fb8a..6487f2126833 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2859,7 +2859,12 @@ static int qcom_param_page_type_exec(struct nand_chip *chip,  const struct nand_
 	const struct nand_op_instr *instr = NULL;
 	unsigned int op_id = 0;
 	unsigned int len = 0;
-	int ret;
+	int ret, reg_base;
+
+	reg_base = NAND_READ_LOCATION_0;
+
+	if (nandc->props->qpic_v2)
+		reg_base = NAND_READ_LOCATION_LAST_CW_0;
 
 	ret = qcom_parse_instructions(chip, subop, &q_op);
 	if (ret)
@@ -2911,14 +2916,17 @@ static int qcom_param_page_type_exec(struct nand_chip *chip,  const struct nand_
 	op_id = q_op.data_instr_idx;
 	len = nand_subop_get_data_len(subop, op_id);
 
-	nandc_set_read_loc(chip, 0, 0, 0, len, 1);
+	if (nandc->props->qpic_v2)
+		nandc_set_read_loc_last(chip, reg_base, 0, len, 1);
+	else
+		nandc_set_read_loc_first(chip, reg_base, 0, len, 1);
 
 	if (!nandc->props->qpic_v2) {
 		write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
 		write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL);
 	}
 
-	nandc->buf_count = len;
+	nandc->buf_count = 512;
 	memset(nandc->data_buffer, 0xff, nandc->buf_count);
 
 	config_nand_single_cw_page_read(chip, false, 0);
-- 
2.34.1

Re: [PATCH 2/2] mtd: rawnand: qcom: Fix onfi param page read

Posted by Manivannan Sadhasivam 3 days, 9 hours ago

On Tue, Nov 19, 2024 at 02:50:58PM +0530, Md Sadre Alam wrote:
> For QPIC V2 onwards there is a separate register to read
> last code word "QPIC_NAND_READ_LOCATION_LAST_CW_n".
> 
> qcom_param_page_type_exec() is used to read only one code word
> If we will configure number of code words to 1 in QPIC_NAND_DEV0_CFG0

No 'we' in commit message. Also use imperative tone.

> register then QPIC controller thinks its reading the last code word,
> since we are having separate register to read the last code word,
> we have to configure "QPIC_NAND_READ_LOCATION_LAST_CW_n" register
> to fetch data from QPIC buffer to system memory.
> 
> Also there is minimum size to fetch the data from device to QPIC buffer
> is 512-bytes. If size is less than 512-bytes the data will not be
> protected by ECC as per QPIC standard. So while reading onfi parameter
> page from NAND device setting nandc->buf_count = 512.
> 

This is a separate fix and should be in a separate patch.

> Fixes: 89550beb098e ("mtd: rawnand: qcom: Implement exec_op()")

Please describe the impact of the issue. Add relevant failure messages, affected
SoC names etc...

Finally, you should also CC stable list to backport the fixes.

- Mani

> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
> ---
>  drivers/mtd/nand/raw/qcom_nandc.c | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index 34ee8555fb8a..6487f2126833 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -2859,7 +2859,12 @@ static int qcom_param_page_type_exec(struct nand_chip *chip,  const struct nand_
>  	const struct nand_op_instr *instr = NULL;
>  	unsigned int op_id = 0;
>  	unsigned int len = 0;
> -	int ret;
> +	int ret, reg_base;
> +
> +	reg_base = NAND_READ_LOCATION_0;
> +
> +	if (nandc->props->qpic_v2)
> +		reg_base = NAND_READ_LOCATION_LAST_CW_0;
>  
>  	ret = qcom_parse_instructions(chip, subop, &q_op);
>  	if (ret)
> @@ -2911,14 +2916,17 @@ static int qcom_param_page_type_exec(struct nand_chip *chip,  const struct nand_
>  	op_id = q_op.data_instr_idx;
>  	len = nand_subop_get_data_len(subop, op_id);
>  
> -	nandc_set_read_loc(chip, 0, 0, 0, len, 1);
> +	if (nandc->props->qpic_v2)
> +		nandc_set_read_loc_last(chip, reg_base, 0, len, 1);
> +	else
> +		nandc_set_read_loc_first(chip, reg_base, 0, len, 1);
>  
>  	if (!nandc->props->qpic_v2) {
>  		write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
>  		write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL);
>  	}
>  
> -	nandc->buf_count = len;
> +	nandc->buf_count = 512;
>  	memset(nandc->data_buffer, 0xff, nandc->buf_count);
>  
>  	config_nand_single_cw_page_read(chip, false, 0);
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

Re: [PATCH 2/2] mtd: rawnand: qcom: Fix onfi param page read

Posted by Md Sadre Alam 2 days, 10 hours ago


On 11/20/2024 12:36 PM, Manivannan Sadhasivam wrote:
> On Tue, Nov 19, 2024 at 02:50:58PM +0530, Md Sadre Alam wrote:
>> For QPIC V2 onwards there is a separate register to read
>> last code word "QPIC_NAND_READ_LOCATION_LAST_CW_n".
>>
>> qcom_param_page_type_exec() is used to read only one code word
>> If we will configure number of code words to 1 in QPIC_NAND_DEV0_CFG0
> 
> No 'we' in commit message. Also use imperative tone.
Ok
> 
>> register then QPIC controller thinks its reading the last code word,
>> since we are having separate register to read the last code word,
>> we have to configure "QPIC_NAND_READ_LOCATION_LAST_CW_n" register
>> to fetch data from QPIC buffer to system memory.
>>
>> Also there is minimum size to fetch the data from device to QPIC buffer
>> is 512-bytes. If size is less than 512-bytes the data will not be
>> protected by ECC as per QPIC standard. So while reading onfi parameter
>> page from NAND device setting nandc->buf_count = 512.
>>
> 
> This is a separate fix and should be in a separate patch.
Ok
> 
>> Fixes: 89550beb098e ("mtd: rawnand: qcom: Implement exec_op()")
> 
> Please describe the impact of the issue. Add relevant failure messages, affected
> SoC names etc...
Sure, Will update in next revision.
> 
> Finally, you should also CC stable list to backport the fixes.
Ok
> 
> - Mani
> 
>> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
>> ---
>>   drivers/mtd/nand/raw/qcom_nandc.c | 14 +++++++++++---
>>   1 file changed, 11 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
>> index 34ee8555fb8a..6487f2126833 100644
>> --- a/drivers/mtd/nand/raw/qcom_nandc.c
>> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
>> @@ -2859,7 +2859,12 @@ static int qcom_param_page_type_exec(struct nand_chip *chip,  const struct nand_
>>   	const struct nand_op_instr *instr = NULL;
>>   	unsigned int op_id = 0;
>>   	unsigned int len = 0;
>> -	int ret;
>> +	int ret, reg_base;
>> +
>> +	reg_base = NAND_READ_LOCATION_0;
>> +
>> +	if (nandc->props->qpic_v2)
>> +		reg_base = NAND_READ_LOCATION_LAST_CW_0;
>>   
>>   	ret = qcom_parse_instructions(chip, subop, &q_op);
>>   	if (ret)
>> @@ -2911,14 +2916,17 @@ static int qcom_param_page_type_exec(struct nand_chip *chip,  const struct nand_
>>   	op_id = q_op.data_instr_idx;
>>   	len = nand_subop_get_data_len(subop, op_id);
>>   
>> -	nandc_set_read_loc(chip, 0, 0, 0, len, 1);
>> +	if (nandc->props->qpic_v2)
>> +		nandc_set_read_loc_last(chip, reg_base, 0, len, 1);
>> +	else
>> +		nandc_set_read_loc_first(chip, reg_base, 0, len, 1);
>>   
>>   	if (!nandc->props->qpic_v2) {
>>   		write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
>>   		write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL);
>>   	}
>>   
>> -	nandc->buf_count = len;
>> +	nandc->buf_count = 512;
>>   	memset(nandc->data_buffer, 0xff, nandc->buf_count);
>>   
>>   	config_nand_single_cw_page_read(chip, false, 0);
>> -- 
>> 2.34.1
>>
>