== Description:

This series is the fourth of a multi-part series, that prepares and adds
support for the new lan969x switch driver.

The upstreaming efforts is split into multiple series (might change a
bit as we go along):

        1) Prepare the Sparx5 driver for lan969x (merged)

        2) Add support for lan969x (same basic features as Sparx5
           provides excl. FDMA and VCAP, merged).

        3) Add lan969x VCAP functionality (merged).

    --> 4) Add RGMII support.

        5) Add FDMA support.

== RGMII support:

The lan969x switch device includes two RGMII interfaces (port 28 and 29)
supporting data speeds of 1 Gbps, 100 Mbps and 10 Mbps.

Details are in the commit description of the patches.

== Patch breakdown:

Patch #1 does some preparation work.

Patch #2 adds new function: is_port_rgmii() to the match data ops.

Patch #3 uses the is_port_rgmii() in a number of places.

Patch #4 uses the phy_interface_mode_is_rgmii() in a number of places.

Patch #5 adds checks for RGMII PHY modes in sparx5_verify_speeds().

Patch #6 adds registers required to configure RGMII.

Patch #7 adds RGMII configuration function and uses it.

To: UNGLinuxDriver@microchip.com
To: Andrew Lunn <andrew+netdev@lunn.ch>
To: David S. Miller <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Lars Povlsen <lars.povlsen@microchip.com>
To: Steen Hegelund <Steen.Hegelund@microchip.com>
To: Horatiu Vultur <horatiu.vultur@microchip.com>
To: Russell King <linux@armlinux.org.uk>
To: jacob.e.keller@intel.com
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org

Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
---
Daniel Machon (7):
      net: sparx5: do some preparation work
      net: sparx5: add function for RGMII port check
      net: sparx5: use is_port_rgmii() throughout
      net: sparx5: use phy_interface_mode_is_rgmii()
      net: sparx5: verify RGMII speeds
      net: lan969x: add RGMII registers
      net: lan969x: add function for configuring RGMII port devices

 drivers/net/ethernet/microchip/lan969x/lan969x.c   | 109 ++++++++++++++++
 drivers/net/ethernet/microchip/lan969x/lan969x.h   |   5 +
 .../net/ethernet/microchip/sparx5/sparx5_main.c    |  29 +++--
 .../net/ethernet/microchip/sparx5/sparx5_main.h    |   6 +
 .../ethernet/microchip/sparx5/sparx5_main_regs.h   | 145 +++++++++++++++++++++
 .../net/ethernet/microchip/sparx5/sparx5_phylink.c |   3 +
 .../net/ethernet/microchip/sparx5/sparx5_port.c    |  57 ++++----
 .../net/ethernet/microchip/sparx5/sparx5_port.h    |   5 +
 8 files changed, 329 insertions(+), 30 deletions(-)
---
base-commit: 157a4881225bd0af5444aab9510e7b6da28f2469
change-id: 20241104-sparx5-lan969x-switch-driver-4-d59b7820485a

Best regards,
-- 
Daniel Machon <daniel.machon@microchip.com>