On SC8280X family SoC, PCIe controllers are connected to SMMUv3, hence
they don't need the config_sid() callback in ops_1_9_0 struct. Fix it by
introducing a new ops struct, namely ops_1_21_0 which is same as ops_1_9_0
without config_sid() callback so that BDF2SID mapping won't be configured
during init.

Fixes: 70574511f3fc ("PCI: qcom: Add support for SC8280XP")
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 88a98be930e3..468bd4242e61 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1367,6 +1367,16 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
+/* Qcom IP rev.: 1.21.0 */
+static const struct qcom_pcie_ops ops_1_21_0 = {
+	.get_resources = qcom_pcie_get_resources_2_7_0,
+	.init = qcom_pcie_init_2_7_0,
+	.post_init = qcom_pcie_post_init_2_7_0,
+	.host_post_init = qcom_pcie_host_post_init_2_7_0,
+	.deinit = qcom_pcie_deinit_2_7_0,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+};
+
 static const struct qcom_pcie_cfg cfg_1_0_0 = {
 	.ops = &ops_1_0_0,
 };
@@ -1405,7 +1415,7 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = {
 };
 
 static const struct qcom_pcie_cfg cfg_sc8280xp = {
-	.ops = &ops_1_9_0,
+	.ops = &ops_1_21_0,
 	.no_l0s = true,
 };
 
-- 
2.34.1

On Wed, Oct 16, 2024 at 08:04:10PM -0700, Qiang Yu wrote:
> On SC8280X family SoC, PCIe controllers are connected to SMMUv3, hence
> they don't need the config_sid() callback in ops_1_9_0 struct. Fix it by
> introducing a new ops struct, namely ops_1_21_0 which is same as ops_1_9_0
> without config_sid() callback so that BDF2SID mapping won't be configured
> during init.

The sc8280xp PCIe devicetree nodes do not specify an 'iommu-map' so the
config_sid() callback is effectively a no-op. Please rephrase this so
that it becomes obvious that this is a clean up rather than fix.

> Fixes: 70574511f3fc ("PCI: qcom: Add support for SC8280XP")

And drop the Fixes tag.

> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 88a98be930e3..468bd4242e61 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1367,6 +1367,16 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
>  	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>  };
>  
> +/* Qcom IP rev.: 1.21.0 */

Is this the actual IP revision on sc8280xp (and not just the revision
used on x1e80100)?

Please also provide the Synopsis IP rev like the other configs do.

> +static const struct qcom_pcie_ops ops_1_21_0 = {
> +	.get_resources = qcom_pcie_get_resources_2_7_0,
> +	.init = qcom_pcie_init_2_7_0,
> +	.post_init = qcom_pcie_post_init_2_7_0,
> +	.host_post_init = qcom_pcie_host_post_init_2_7_0,
> +	.deinit = qcom_pcie_deinit_2_7_0,
> +	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> +};
> +
>  static const struct qcom_pcie_cfg cfg_1_0_0 = {
>  	.ops = &ops_1_0_0,
>  };

And try to keep these structs sorted by revision. At least put this one
after ops_1_9_0.

Johan

On 10/18/2024 9:51 PM, Johan Hovold wrote:
> On Wed, Oct 16, 2024 at 08:04:10PM -0700, Qiang Yu wrote:
>> On SC8280X family SoC, PCIe controllers are connected to SMMUv3, hence
>> they don't need the config_sid() callback in ops_1_9_0 struct. Fix it by
>> introducing a new ops struct, namely ops_1_21_0 which is same as ops_1_9_0
>> without config_sid() callback so that BDF2SID mapping won't be configured
>> during init.
> The sc8280xp PCIe devicetree nodes do not specify an 'iommu-map' so the
> config_sid() callback is effectively a no-op. Please rephrase this so
> that it becomes obvious that this is a clean up rather than fix.
>
>> Fixes: 70574511f3fc ("PCI: qcom: Add support for SC8280XP")
> And drop the Fixes tag.
>
>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>> ---
>>   drivers/pci/controller/dwc/pcie-qcom.c | 12 +++++++++++-
>>   1 file changed, 11 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
>> index 88a98be930e3..468bd4242e61 100644
>> --- a/drivers/pci/controller/dwc/pcie-qcom.c
>> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
>> @@ -1367,6 +1367,16 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
>>   	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>>   };
>>   
>> +/* Qcom IP rev.: 1.21.0 */
> Is this the actual IP revision on sc8280xp (and not just the revision
> used on x1e80100)?
Get confirmation from HW team. 1.21.0 is Qcom IP rev of sc8280xp,
Synopsis IP rev is 5.60a.

Thanks,
Qiang
> Please also provide the Synopsis IP rev like the other configs do.
>
>> +static const struct qcom_pcie_ops ops_1_21_0 = {
>> +	.get_resources = qcom_pcie_get_resources_2_7_0,
>> +	.init = qcom_pcie_init_2_7_0,
>> +	.post_init = qcom_pcie_post_init_2_7_0,
>> +	.host_post_init = qcom_pcie_host_post_init_2_7_0,
>> +	.deinit = qcom_pcie_deinit_2_7_0,
>> +	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>> +};
>> +
>>   static const struct qcom_pcie_cfg cfg_1_0_0 = {
>>   	.ops = &ops_1_0_0,
>>   };
> And try to keep these structs sorted by revision. At least put this one
> after ops_1_9_0.
>
> Johan