On Fri, Oct 11, 2024 at 01:27:31PM +0300, Aleksandr Shubin wrote:
> v2:
> - fix dt-bindings
> - fix a remark in the driver
>
> v3:
> - fix dt-bindings
> - fix sunxi-d1s-t113.dtsi
>
> v4:
> - fix a remark in the driver
>
> v5:
> - dropped unused varibale in the driver
> - fix dt-bindings
>
> v6:
> - add apb0 clock
>
> v7:
> - fix a remark in the driver
> - add maintainer
>
> v8:
> - fix compile driver for 6.8-rc
>
> v9:
> - fix a remark in the driver
> - fix dt-bindings
> - rename apb0 -> apb
>
> v10:
> - fix a remark in the driver
> - fix compile driver for 6.12-rc2
>
> Aleksandr Shubin (3):
> dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM
> controller
> pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support
> riscv: dts: allwinner: d1: Add pwm node
>
> .../bindings/pwm/allwinner,sun20i-pwm.yaml | 84 ++++
> .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 12 +
> drivers/pwm/Kconfig | 10 +
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-sun20i.c | 379 ++++++++++++++++++
> 5 files changed, 486 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> create mode 100644 drivers/pwm/pwm-sun20i.c
>
> --
> 2.25.1
>
This patch has been idle for a few months, would you mind if I took
over shepherding it to mainline? While I don't have *this* hardware
to test it with I have an H616 which has a similar pwm controller (and
for which I was going to add support for once this made it to
mainline). Otherwise, I can just wait patiently and then tack on my
additions once this has been accepted.
Thank you,
Chris