Add overlay to enable the PCIE1 instance of PCIe on J7200-EVM in
Endpoint mode of operation.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---

Hello,

This patch is based on linux-next tagged next-20241001.
v1:
https://lore.kernel.org/r/20240304094559.76406-1-s-vadapalli@ti.com/
Changes since v1:
- Rebased patch on next-20241001.

Logs validating overlay with J784S4-EVM as Root-Complex and J7200-EVM as
Endpoint:
https://gist.github.com/Siddharth-Vadapalli-at-TI/38364f5fc47b670fff4ef65dcf60b9fc

Regards,
Siddharth.

 arch/arm64/boot/dts/ti/Makefile               |  5 ++
 .../boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso    | 53 +++++++++++++++++++
 2 files changed, 58 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index bcd392c3206e..3ced231d273e 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am654-pcie-usb3.dtbo
 # Boards with J7200 SoC
 k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm-pcie1-ep.dtbo
 
 # Boards with J721e SoC
 k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo
@@ -188,6 +189,8 @@ k3-am68-sk-base-board-csi2-dual-imx219-dtbs := k3-am68-sk-base-board.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
 k3-am69-sk-csi2-dual-imx219-dtbs := k3-am69-sk.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
+k3-j7200-evm-pcie1-ep-dtbs := k3-j7200-common-proc-board.dtb \
+	k3-j7200-evm-pcie1-ep.dtbo
 k3-j721e-common-proc-board-infotainment-dtbs := k3-j721e-common-proc-board.dtb \
 	k3-j721e-common-proc-board-infotainment.dtbo
 k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
@@ -221,6 +224,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
 	k3-am68-sk-base-board-csi2-dual-imx219.dtb \
 	k3-am69-sk-csi2-dual-imx219.dtb \
+	k3-j7200-evm-pcie1-ep.dtbo \
 	k3-j721e-common-proc-board-infotainment.dtb \
 	k3-j721e-evm-pcie0-ep.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtb \
@@ -243,6 +247,7 @@ DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
 DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
 DTC_FLAGS_k3-am68-sk-base-board += -@
 DTC_FLAGS_k3-am69-sk += -@
+DTC_FLAGS_k3-j7200-common-proc-board += -@
 DTC_FLAGS_k3-j721e-common-proc-board += -@
 DTC_FLAGS_k3-j721e-sk += -@
 DTC_FLAGS_k3-j721s2-common-proc-board += -@
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso
new file mode 100644
index 000000000000..3cc315a0e084
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 6>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+	};
+};
-- 
2.40.1

Hi Siddharth Vadapalli,

On Tue, 01 Oct 2024 15:04:26 +0530, Siddharth Vadapalli wrote:
> Add overlay to enable the PCIE1 instance of PCIe on J7200-EVM in
> Endpoint mode of operation.
> 
> 

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-j7200-evm: Add overlay for PCIE1 Endpoint Mode
      commit: f43ec89bbc83813efa1d33215ab920e66fcc9471

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh