drivers/irqchip/irq-mbigen.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-)
The mbigen interrupt chip has its per node registers located in a
contiguous region of page sized chunks. The code maps them into
virtual address space as a contiguous region and determines the
address of a node by using the node ID as index.
mbigen chip
|-----------------|------------|--------------|
mgn_node_0 mgn_node_1 ... mgn_node_i
|--------------| |--------------| |----------------------|
[0x0000, 0x1000) [0x1000, 0x2000) [i*0x1000, (i+1)*0x1000)
This works correctly up to 10 nodes, but then fails because the
11th's array slot is used for the MGN_CLEAR registers.
mbigen chip
|-----------|--------|--------|---------------|--------|
mgn_node_0 mgn_node_1 ... mgn_clear_register ... mgn_node_i
|-----------------|
[0xA000, 0xB000)
Skip the MGN_CLEAR register space when calculating the
offset for node IDs greater or equal to ten.
Fixes: a6c2f87b8820 ("irqchip/mbigen: Implement the mbigen irq chip operation functions")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
---
drivers/irqchip/irq-mbigen.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index 093fd42893a7..53cc08387588 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -64,6 +64,20 @@ struct mbigen_device {
void __iomem *base;
};
+static inline unsigned int get_mbigen_node_offset(unsigned int nid)
+{
+ unsigned int offset = nid * MBIGEN_NODE_OFFSET;
+
+ /*
+ * To avoid touched clear register in unexpected way, we need to directly
+ * skip clear register when access to more than 10 mbigen nodes.
+ */
+ if (nid >= (REG_MBIGEN_CLEAR_OFFSET / MBIGEN_NODE_OFFSET))
+ offset += MBIGEN_NODE_OFFSET;
+
+ return offset;
+}
+
static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
{
unsigned int nid, pin;
@@ -72,8 +86,7 @@ static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
pin = hwirq % IRQS_PER_MBIGEN_NODE;
- return pin * 4 + nid * MBIGEN_NODE_OFFSET
- + REG_MBIGEN_VEC_OFFSET;
+ return pin * 4 + get_mbigen_node_offset(nid) + REG_MBIGEN_VEC_OFFSET;
}
static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
@@ -88,8 +101,7 @@ static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
*mask = 1 << (irq_ofst % 32);
ofst = irq_ofst / 32 * 4;
- *addr = ofst + nid * MBIGEN_NODE_OFFSET
- + REG_MBIGEN_TYPE_OFFSET;
+ *addr = ofst + get_mbigen_node_offset(nid) + REG_MBIGEN_TYPE_OFFSET;
}
static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq,
--
2.34.1The following commit has been merged into the irq/urgent branch of tip:
Commit-ID: 6be6cba9c4371d27f78d900ccfe34bb880d9ee20
Gitweb: https://git.kernel.org/tip/6be6cba9c4371d27f78d900ccfe34bb880d9ee20
Author: Yipeng Zou <zouyipeng@huawei.com>
AuthorDate: Tue, 30 Jul 2024 09:44:00 +08:00
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Tue, 30 Jul 2024 20:59:12 +02:00
irqchip/mbigen: Fix mbigen node address layout
The mbigen interrupt chip has its per node registers located in a
contiguous region of page sized chunks. The code maps them into virtual
address space as a contiguous region and determines the address of a node
by using the node ID as index.
mbigen chip
|-----------------|------------|--------------|
mgn_node_0 mgn_node_1 ... mgn_node_i
|--------------| |--------------| |----------------------|
[0x0000, 0x0x0FFF] [0x1000, 0x1FFF] [i*0x1000, (i+1)*0x1000 - 1]
This works correctly up to 10 nodes, but then fails because the 11th's
array slot is used for the MGN_CLEAR registers.
mbigen chip
|-----------|--------|--------|---------------|--------|
mgn_node_0 mgn_node_1 ... mgn_clear_register ... mgn_node_i
|-----------------|
[0xA000, 0xAFFF]
Skip the MGN_CLEAR register space when calculating the offset for node IDs
greater than or equal to ten.
Fixes: a6c2f87b8820 ("irqchip/mbigen: Implement the mbigen irq chip operation functions")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240730014400.1751530-1-zouyipeng@huawei.com
---
drivers/irqchip/irq-mbigen.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index 093fd42..53cc083 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -64,6 +64,20 @@ struct mbigen_device {
void __iomem *base;
};
+static inline unsigned int get_mbigen_node_offset(unsigned int nid)
+{
+ unsigned int offset = nid * MBIGEN_NODE_OFFSET;
+
+ /*
+ * To avoid touched clear register in unexpected way, we need to directly
+ * skip clear register when access to more than 10 mbigen nodes.
+ */
+ if (nid >= (REG_MBIGEN_CLEAR_OFFSET / MBIGEN_NODE_OFFSET))
+ offset += MBIGEN_NODE_OFFSET;
+
+ return offset;
+}
+
static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
{
unsigned int nid, pin;
@@ -72,8 +86,7 @@ static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
pin = hwirq % IRQS_PER_MBIGEN_NODE;
- return pin * 4 + nid * MBIGEN_NODE_OFFSET
- + REG_MBIGEN_VEC_OFFSET;
+ return pin * 4 + get_mbigen_node_offset(nid) + REG_MBIGEN_VEC_OFFSET;
}
static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
@@ -88,8 +101,7 @@ static inline void get_mbigen_type_reg(irq_hw_number_t hwirq,
*mask = 1 << (irq_ofst % 32);
ofst = irq_ofst / 32 * 4;
- *addr = ofst + nid * MBIGEN_NODE_OFFSET
- + REG_MBIGEN_TYPE_OFFSET;
+ *addr = ofst + get_mbigen_node_offset(nid) + REG_MBIGEN_TYPE_OFFSET;
}
static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq,© 2016 - 2025 Red Hat, Inc.