1. Patchew
  2. linux
  3. View series

[PATCH v2] gpio: tegra186: Fix tegra186_gpio_is_accessible() check

Prathamesh Shete posted 1 patch 1 week, 5 days ago
There is a newer version of this series
drivers/gpio/gpio-tegra186.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
[PATCH v2] gpio: tegra186: Fix tegra186_gpio_is_accessible() check
Posted by Prathamesh Shete 1 week, 5 days ago 
The controller has several register bits describing access control
information for a given GPIO pin. When SCR_SEC_[R|W]EN is unset, it
means we have full read/write access to all the registers for given GPIO
pin. When SCR_SEC[R|W]EN is set, it means we need to further check the
accompanying SCR_SEC_G1[R|W] bit to determine read/write access to all
the registers for given GPIO pin.

This check was previously declaring that a GPIO pin was accessible
only if either of the following conditions were met:

  - SCR_SEC_REN + SCR_SEC_WEN both set

    or

  - SCR_SEC_REN + SCR_SEC_WEN both set and
    SCR_SEC_G1R + SCR_SEC_G1W both set

Update the check to properly handle cases where only one of
SCR_SEC_REN or SCR_SEC_WEN is set.

Fixes: b2b56a163230 ("gpio: tegra186: Check GPIO pin permission before access.")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
---
 drivers/gpio/gpio-tegra186.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index d87dd06db40d..9130c691a2dd 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -36,12 +36,6 @@
 #define  TEGRA186_GPIO_SCR_SEC_REN		BIT(27)
 #define  TEGRA186_GPIO_SCR_SEC_G1W		BIT(9)
 #define  TEGRA186_GPIO_SCR_SEC_G1R		BIT(1)
-#define  TEGRA186_GPIO_FULL_ACCESS		(TEGRA186_GPIO_SCR_SEC_WEN | \
-						 TEGRA186_GPIO_SCR_SEC_REN | \
-						 TEGRA186_GPIO_SCR_SEC_G1R | \
-						 TEGRA186_GPIO_SCR_SEC_G1W)
-#define  TEGRA186_GPIO_SCR_SEC_ENABLE		(TEGRA186_GPIO_SCR_SEC_WEN | \
-						 TEGRA186_GPIO_SCR_SEC_REN)
 
 /* control registers */
 #define TEGRA186_GPIO_ENABLE_CONFIG 0x00
@@ -177,10 +171,18 @@ static inline bool tegra186_gpio_is_accessible(struct tegra_gpio *gpio, unsigned
 
 	value = __raw_readl(secure + TEGRA186_GPIO_SCR);
 
-	if ((value & TEGRA186_GPIO_SCR_SEC_ENABLE) == 0)
-		return true;
+	/*
+	 * When SCR_SEC_[R|W]EN is unset, then we have full read/write access to all the
+	 * registers for given GPIO pin.
+	 * When SCR_SEC[R|W]EN is set, then there is need to further check the accompanying
+	 * SCR_SEC_G1[R|W] bit to determine read/write access to all the registers for given
+	 * GPIO pin.
+	 */
 
-	if ((value & TEGRA186_GPIO_FULL_ACCESS) == TEGRA186_GPIO_FULL_ACCESS)
+	if (((value & TEGRA186_GPIO_SCR_SEC_REN) == 0 ||
+	     ((value & TEGRA186_GPIO_SCR_SEC_REN) && (value & TEGRA186_GPIO_SCR_SEC_G1R))) &&
+	     ((value & TEGRA186_GPIO_SCR_SEC_WEN) == 0 ||
+	     ((value & TEGRA186_GPIO_SCR_SEC_WEN) && (value & TEGRA186_GPIO_SCR_SEC_G1W))))
 		return true;
 
 	return false;
-- 
2.17.1
Re: [PATCH v2] gpio: tegra186: Fix tegra186_gpio_is_accessible() check
Posted by Bartosz Golaszewski 1 week, 4 days ago 
On Tue, Apr 23, 2024 at 2:00 PM Prathamesh Shete <pshete@nvidia.com> wrote:
>
> The controller has several register bits describing access control
> information for a given GPIO pin. When SCR_SEC_[R|W]EN is unset, it
> means we have full read/write access to all the registers for given GPIO
> pin. When SCR_SEC[R|W]EN is set, it means we need to further check the
> accompanying SCR_SEC_G1[R|W] bit to determine read/write access to all
> the registers for given GPIO pin.
>
> This check was previously declaring that a GPIO pin was accessible
> only if either of the following conditions were met:
>
>   - SCR_SEC_REN + SCR_SEC_WEN both set
>
>     or
>
>   - SCR_SEC_REN + SCR_SEC_WEN both set and
>     SCR_SEC_G1R + SCR_SEC_G1W both set
>
> Update the check to properly handle cases where only one of
> SCR_SEC_REN or SCR_SEC_WEN is set.
>
> Fixes: b2b56a163230 ("gpio: tegra186: Check GPIO pin permission before access.")
> Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
> ---

No changelog since v1. No Thierry's tag. Please resend.

Bart
[PATCH v3] gpio: tegra186: Fix tegra186_gpio_is_accessible() check
Posted by Prathamesh Shete 1 week, 4 days ago 
The controller has several register bits describing access control
information for a given GPIO pin. When SCR_SEC_[R|W]EN is unset, it
means we have full read/write access to all the registers for given GPIO
pin. When SCR_SEC[R|W]EN is set, it means we need to further check the
accompanying SCR_SEC_G1[R|W] bit to determine read/write access to all
the registers for given GPIO pin.

This check was previously declaring that a GPIO pin was accessible
only if either of the following conditions were met:

  - SCR_SEC_REN + SCR_SEC_WEN both set

    or

  - SCR_SEC_REN + SCR_SEC_WEN both set and
    SCR_SEC_G1R + SCR_SEC_G1W both set

Update the check to properly handle cases where only one of
SCR_SEC_REN or SCR_SEC_WEN is set.

Fixes: b2b56a163230 ("gpio: tegra186: Check GPIO pin permission before access.")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
V2 -> V3: Retain Thierry's 'Acked-by' tag from V1 and add change log.
V1 -> V2: Fix kernel test bot warning.

 drivers/gpio/gpio-tegra186.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index d87dd06db40d..9130c691a2dd 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -36,12 +36,6 @@
 #define  TEGRA186_GPIO_SCR_SEC_REN		BIT(27)
 #define  TEGRA186_GPIO_SCR_SEC_G1W		BIT(9)
 #define  TEGRA186_GPIO_SCR_SEC_G1R		BIT(1)
-#define  TEGRA186_GPIO_FULL_ACCESS		(TEGRA186_GPIO_SCR_SEC_WEN | \
-						 TEGRA186_GPIO_SCR_SEC_REN | \
-						 TEGRA186_GPIO_SCR_SEC_G1R | \
-						 TEGRA186_GPIO_SCR_SEC_G1W)
-#define  TEGRA186_GPIO_SCR_SEC_ENABLE		(TEGRA186_GPIO_SCR_SEC_WEN | \
-						 TEGRA186_GPIO_SCR_SEC_REN)
 
 /* control registers */
 #define TEGRA186_GPIO_ENABLE_CONFIG 0x00
@@ -177,10 +171,18 @@ static inline bool tegra186_gpio_is_accessible(struct tegra_gpio *gpio, unsigned
 
 	value = __raw_readl(secure + TEGRA186_GPIO_SCR);
 
-	if ((value & TEGRA186_GPIO_SCR_SEC_ENABLE) == 0)
-		return true;
+	/*
+	 * When SCR_SEC_[R|W]EN is unset, then we have full read/write access to all the
+	 * registers for given GPIO pin.
+	 * When SCR_SEC[R|W]EN is set, then there is need to further check the accompanying
+	 * SCR_SEC_G1[R|W] bit to determine read/write access to all the registers for given
+	 * GPIO pin.
+	 */
 
-	if ((value & TEGRA186_GPIO_FULL_ACCESS) == TEGRA186_GPIO_FULL_ACCESS)
+	if (((value & TEGRA186_GPIO_SCR_SEC_REN) == 0 ||
+	     ((value & TEGRA186_GPIO_SCR_SEC_REN) && (value & TEGRA186_GPIO_SCR_SEC_G1R))) &&
+	     ((value & TEGRA186_GPIO_SCR_SEC_WEN) == 0 ||
+	     ((value & TEGRA186_GPIO_SCR_SEC_WEN) && (value & TEGRA186_GPIO_SCR_SEC_G1W))))
 		return true;
 
 	return false;
-- 
2.17.1
Re: [PATCH v3] gpio: tegra186: Fix tegra186_gpio_is_accessible() check
Posted by Bartosz Golaszewski 1 week, 4 days ago 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>


On Wed, 24 Apr 2024 15:25:14 +0530, Prathamesh Shete wrote:
> The controller has several register bits describing access control
> information for a given GPIO pin. When SCR_SEC_[R|W]EN is unset, it
> means we have full read/write access to all the registers for given GPIO
> pin. When SCR_SEC[R|W]EN is set, it means we need to further check the
> accompanying SCR_SEC_G1[R|W] bit to determine read/write access to all
> the registers for given GPIO pin.
> 
> [...]

Applied, thanks!

[1/1] gpio: tegra186: Fix tegra186_gpio_is_accessible() check
      commit: d806f474a9a7993648a2c70642ee129316d8deff

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Patchew 2.1-devel-0870f84

© 2016 - 2024 Red Hat, Inc.