1. Patchew
  2. linux
  3. View series

[PATCH] arm64: dts: rockchip: add attiny_rst_gate to Ringneck

Jakob Unterwurzacher posted 1 patch 1 year, 10 months ago
There is a newer version of this series
arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
[PATCH] arm64: dts: rockchip: add attiny_rst_gate to Ringneck
Posted by Jakob Unterwurzacher 1 year, 10 months ago 
Ringneck v1.4 can contain (placement option) an on-board ATtiny
microcontroller instead of an STM32. In normal operation, this
is transparent to the software, as both microcontrollers emulate
the same ICs (amc6821 and isl1208).

For flashing the ATtiny, the SWITCH_REG1 regulator of the board's PMIC is
used to enable the ATtiny UPDI debug interface. If the STM32 is placed, or if
we are running on an older Ringneck revision, SWITCH_REG1 is not connected
and has no effect.

Add attiny-updi-gate-regulator so userspace can control it via sysfs:

  echo enabled > /sys/devices/platform/attiny-updi-gate-regulator/state

Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
---
 arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
index dec29a75d361..1f7f4b2ea66a 100644
--- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@@ -15,6 +15,12 @@ aliases {
 		rtc1 = &rk809;
 	};
 
+	/* allows userspace to control the gate of the ATtiny UPDI pass FET via sysfs */
+	attiny-updi-gate-regulator {
+		compatible = "regulator-output";
+		vout-supply = <&vg_attiny_updi>;
+	};
+
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		pinctrl-0 = <&emmc_reset>;
@@ -146,6 +152,7 @@ rk809: pmic@20 {
 		vcc5-supply = <&vcc_3v3>;
 		vcc6-supply = <&vcc_3v3>;
 		vcc7-supply = <&vcc_3v3>;
+		vcc8-supply = <&vcc5v0_sys>;
 		vcc9-supply = <&vcc5v0_sys>;
 
 		regulators {
@@ -290,6 +297,11 @@ regulator-state-mem {
 					regulator-suspend-microvolt = <1800000>;
 				};
 			};
+
+			/* supplies the gate of the ATtiny UPDI pass FET */
+			vg_attiny_updi: SWITCH_REG1 {
+				regulator-name = "vg_attiny_updi";
+			};
 		};
 	};
 };
-- 
2.43.0
Re: [PATCH] arm64: dts: rockchip: add attiny_rst_gate to Ringneck
Posted by Quentin Schulz 1 year, 2 months ago 
Hi Jakob,

On 2/1/24 1:44 PM, Jakob Unterwurzacher wrote:
> Ringneck v1.4 can contain (placement option) an on-board ATtiny
> microcontroller instead of an STM32. In normal operation, this
> is transparent to the software, as both microcontrollers emulate
> the same ICs (amc6821 and isl1208).
> 
> For flashing the ATtiny, the SWITCH_REG1 regulator of the board's PMIC is
> used to enable the ATtiny UPDI debug interface. If the STM32 is placed, or if
> we are running on an older Ringneck revision, SWITCH_REG1 is not connected
> and has no effect.
> 
> Add attiny-updi-gate-regulator so userspace can control it via sysfs:
> 
>    echo enabled > /sys/devices/platform/attiny-updi-gate-regulator/state
> 

CONFIG_REGULATOR_USERSPACE_CONSUMER needs to be enabled for this to 
work. Just putting this here as I had forgotten and was wondering why 
this sysfs file wasn't available to me :)

> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>

I finally have access to some HW to test this, and therefore can give my:

Tested-by: Quentin Schulz <quentin.schulz@cherry.de>

> ---
>   arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi | 12 ++++++++++++
>   1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
> index dec29a75d361..1f7f4b2ea66a 100644
> --- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
> @@ -15,6 +15,12 @@ aliases {
>   		rtc1 = &rk809;
>   	};
>   
> +	/* allows userspace to control the gate of the ATtiny UPDI pass FET via sysfs */
> +	attiny-updi-gate-regulator {
> +		compatible = "regulator-output";
> +		vout-supply = <&vg_attiny_updi>;
> +	};
> +
>   	emmc_pwrseq: emmc-pwrseq {
>   		compatible = "mmc-pwrseq-emmc";
>   		pinctrl-0 = <&emmc_reset>;
> @@ -146,6 +152,7 @@ rk809: pmic@20 {
>   		vcc5-supply = <&vcc_3v3>;
>   		vcc6-supply = <&vcc_3v3>;
>   		vcc7-supply = <&vcc_3v3>;
> +		vcc8-supply = <&vcc5v0_sys>;

According to the schematics, vcc8 is routed to SWITCH_REG2 and not 
SWITCH_REG1, which is fed vcc9. Even more so, vcc8 on the PMIC isn't 
actually routed.

I therefore think we can simply remove this line here.

@Jakob, do you agree? Can you send a v2 if so?

Cheers,
Quentin
[PATCH v2] arm64: dts: rockchip: add attiny_rst_gate to Ringneck
Posted by Jakob Unterwurzacher 1 year, 2 months ago 
Ringneck v1.4 can contain (placement option) an on-board ATtiny
microcontroller instead of an STM32. In normal operation, this
is transparent to the software, as both microcontrollers emulate
the same ICs (amc6821 and isl1208).

For flashing the ATtiny, the SWITCH_REG1 regulator of the board's PMIC is
used to enable the ATtiny UPDI debug interface. If the STM32 is placed, or if
we are running on an older Ringneck revision, SWITCH_REG1 is not connected
and has no effect.

Add attiny-updi-gate-regulator so userspace can control it via sysfs
(needs CONFIG_REGULATOR_USERSPACE_CONSUMER):

  echo enabled > /sys/devices/platform/attiny-updi-gate-regulator/state

Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
---
v2: remove vcc8-supply

 arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
index bb1aea82e666e..216a6b6a6ee74 100644
--- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@@ -15,6 +15,12 @@ aliases {
 		rtc1 = &rk809;
 	};
 
+	/* allows userspace to control the gate of the ATtiny UPDI pass FET via sysfs */
+	attiny-updi-gate-regulator {
+		compatible = "regulator-output";
+		vout-supply = <&vg_attiny_updi>;
+	};
+
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		pinctrl-0 = <&emmc_reset>;
@@ -281,6 +287,11 @@ regulator-state-mem {
 					regulator-suspend-microvolt = <1800000>;
 				};
 			};
+
+			/* supplies the gate of the ATtiny UPDI pass FET */
+			vg_attiny_updi: SWITCH_REG1 {
+				regulator-name = "vg_attiny_updi";
+			};
 		};
 	};
 };
-- 
2.39.2
Re: [PATCH v2] arm64: dts: rockchip: add attiny_rst_gate to Ringneck
Posted by Heiko Stuebner 1 year, 2 months ago 
On Thu, 26 Sep 2024 15:20:30 +0200, Jakob Unterwurzacher wrote:
> Ringneck v1.4 can contain (placement option) an on-board ATtiny
> microcontroller instead of an STM32. In normal operation, this
> is transparent to the software, as both microcontrollers emulate
> the same ICs (amc6821 and isl1208).
> 
> For flashing the ATtiny, the SWITCH_REG1 regulator of the board's PMIC is
> used to enable the ATtiny UPDI debug interface. If the STM32 is placed, or if
> we are running on an older Ringneck revision, SWITCH_REG1 is not connected
> and has no effect.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: rockchip: add attiny_rst_gate to Ringneck
      commit: 1871e6f7c5e606b97708af50a7fec83a904a761b

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>
Re: [PATCH v2] arm64: dts: rockchip: add attiny_rst_gate to Ringneck
Posted by Quentin Schulz 1 year, 2 months ago 
Hi Jakob,

On 9/26/24 3:20 PM, Jakob Unterwurzacher wrote:
> Ringneck v1.4 can contain (placement option) an on-board ATtiny
> microcontroller instead of an STM32. In normal operation, this
> is transparent to the software, as both microcontrollers emulate
> the same ICs (amc6821 and isl1208).
> 
> For flashing the ATtiny, the SWITCH_REG1 regulator of the board's PMIC is
> used to enable the ATtiny UPDI debug interface. If the STM32 is placed, or if
> we are running on an older Ringneck revision, SWITCH_REG1 is not connected
> and has no effect.
> 
> Add attiny-updi-gate-regulator so userspace can control it via sysfs
> (needs CONFIG_REGULATOR_USERSPACE_CONSUMER):
> 
>    echo enabled > /sys/devices/platform/attiny-updi-gate-regulator/state
> 
> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
> Tested-by: Quentin Schulz <quentin.schulz@cherry.de>

Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>

This is a candidate for backporting to stable branches as well I assume, 
@Heiko?

Thanks!
Quentin
Re: [PATCH v2] arm64: dts: rockchip: add attiny_rst_gate to Ringneck
Posted by Heiko Stuebner 1 year, 2 months ago 
Am Donnerstag, 26. September 2024, 15:24:03 CEST schrieb Quentin Schulz:
> Hi Jakob,
> 
> On 9/26/24 3:20 PM, Jakob Unterwurzacher wrote:
> > Ringneck v1.4 can contain (placement option) an on-board ATtiny
> > microcontroller instead of an STM32. In normal operation, this
> > is transparent to the software, as both microcontrollers emulate
> > the same ICs (amc6821 and isl1208).
> > 
> > For flashing the ATtiny, the SWITCH_REG1 regulator of the board's PMIC is
> > used to enable the ATtiny UPDI debug interface. If the STM32 is placed, or if
> > we are running on an older Ringneck revision, SWITCH_REG1 is not connected
> > and has no effect.
> > 
> > Add attiny-updi-gate-regulator so userspace can control it via sysfs
> > (needs CONFIG_REGULATOR_USERSPACE_CONSUMER):
> > 
> >    echo enabled > /sys/devices/platform/attiny-updi-gate-regulator/state
> > 
> > Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
> > Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
> 
> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
> 
> This is a candidate for backporting to stable branches as well I assume, 
> @Heiko?

That is more on the darker side of gray here.

Looking at the stable-kernel-rules [0] the criteria is
  "It must either fix a real bug that bothers people or just add a device ID"

This change instead is adding a new feature to allow said flashing from a
running system.

sidenote: please don't post new versions as replies to previous versions,
as that confuses tooling a lot.

Heiko


[0] https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
Re: [PATCH v2] arm64: dts: rockchip: add attiny_rst_gate to Ringneck
Posted by Quentin Schulz 1 year, 2 months ago 
Hi Heiko,

On 9/27/24 11:39 AM, Heiko Stuebner wrote:
> Am Donnerstag, 26. September 2024, 15:24:03 CEST schrieb Quentin Schulz:
>> Hi Jakob,
>>
>> On 9/26/24 3:20 PM, Jakob Unterwurzacher wrote:
>>> Ringneck v1.4 can contain (placement option) an on-board ATtiny
>>> microcontroller instead of an STM32. In normal operation, this
>>> is transparent to the software, as both microcontrollers emulate
>>> the same ICs (amc6821 and isl1208).
>>>
>>> For flashing the ATtiny, the SWITCH_REG1 regulator of the board's PMIC is
>>> used to enable the ATtiny UPDI debug interface. If the STM32 is placed, or if
>>> we are running on an older Ringneck revision, SWITCH_REG1 is not connected
>>> and has no effect.
>>>
>>> Add attiny-updi-gate-regulator so userspace can control it via sysfs
>>> (needs CONFIG_REGULATOR_USERSPACE_CONSUMER):
>>>
>>>     echo enabled > /sys/devices/platform/attiny-updi-gate-regulator/state
>>>
>>> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
>>> Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
>>
>> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
>>
>> This is a candidate for backporting to stable branches as well I assume,
>> @Heiko?
> 
> That is more on the darker side of gray here.
> 
> Looking at the stable-kernel-rules [0] the criteria is
>    "It must either fix a real bug that bothers people or just add a device ID"
> 
> This change instead is adding a new feature to allow said flashing from a
> running system.
> 

This does mean that the new version of the device won't work as well 
with an older kernel though.

I thought the rules for DT backporting were a bit more permissive than 
for drivers. Maybe because most of the DT patches I posted were actual 
fixes :)

Up to you!

Cheers,
Quentin
Re: [PATCH v2] arm64: dts: rockchip: add attiny_rst_gate to Ringneck
Posted by Heiko Stuebner 1 year, 2 months ago 
Hey Quentin,

Am Freitag, 27. September 2024, 11:50:46 CEST schrieb Quentin Schulz:
> On 9/27/24 11:39 AM, Heiko Stuebner wrote:
> > Am Donnerstag, 26. September 2024, 15:24:03 CEST schrieb Quentin Schulz:
> >> Hi Jakob,
> >>
> >> On 9/26/24 3:20 PM, Jakob Unterwurzacher wrote:
> >>> Ringneck v1.4 can contain (placement option) an on-board ATtiny
> >>> microcontroller instead of an STM32. In normal operation, this
> >>> is transparent to the software, as both microcontrollers emulate
> >>> the same ICs (amc6821 and isl1208).
> >>>
> >>> For flashing the ATtiny, the SWITCH_REG1 regulator of the board's PMIC is
> >>> used to enable the ATtiny UPDI debug interface. If the STM32 is placed, or if
> >>> we are running on an older Ringneck revision, SWITCH_REG1 is not connected
> >>> and has no effect.
> >>>
> >>> Add attiny-updi-gate-regulator so userspace can control it via sysfs
> >>> (needs CONFIG_REGULATOR_USERSPACE_CONSUMER):
> >>>
> >>>     echo enabled > /sys/devices/platform/attiny-updi-gate-regulator/state
> >>>
> >>> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
> >>> Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
> >>
> >> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
> >>
> >> This is a candidate for backporting to stable branches as well I assume,
> >> @Heiko?
> > 
> > That is more on the darker side of gray here.
> > 
> > Looking at the stable-kernel-rules [0] the criteria is
> >    "It must either fix a real bug that bothers people or just add a device ID"
> > 
> > This change instead is adding a new feature to allow said flashing from a
> > running system.
> > 
> 
> This does mean that the new version of the device won't work as well 
> with an older kernel though.

"new version of the device" being the key here ;-) .

You also would not expect a new board dts or a new board variant to be
added to stable-kernels.


Heiko

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.